Whirlpool CTAR 7743/2 IN Instruction for Use download pdf (Page 7)

First use / after a power failure

After connecting the hob to the electrical power supply, the control panel is locked. To unlock the control panel, touch the controls for 2 seconds. The

control panel lock indicator switches off and the hob can be used. Read the “Control panel lock” paragraph for more details.

Switching the hob ON/OFF

To switch the hob on, touch the control until the cooking zone displays light up. To switch off, touch the same control until the displays switch off. All the cooking

zones are deactivated. If within 30 seconds of switching on, no function is selected, the hob switches off automatically.

Switching on and adjusting cooking zones

Place the pot on the cooking zone, switching the hob on, activate the required cooking zone by touching the

corresponding “-” or “+” controls: “5” will appear on the display. With “-” and “+” controls it is possible to select the

required power level, from min. 0 to max. 9.

Deactivation of cooking zones

To switch off the cooking zone, touch simultaneously the control “-” and “+” or select the level “0” with the control “-”.

The cooking zone switches off and, if still hot, the letter “H” appears on the zone display.

Control panel lock

This function locks the controls to prevent accidental activation of the hob. To activate the control panel lock, touch the control ; an acoustic signal sounds

and a luminous indicator appears on the display. The control panel is locked except for the switching off function. To deactivate the control panel lock, repeat

the activation procedure.

The presence of water, liquid spilled from pots or any objects resting on the controls can accidentally activate or deactivate the control panel lock

Timer

The timer can be used to set the cooking time for a maximum of 99 minutes (1 hour and 39 minutes) for all the cooking zones. Select the cooking zone to be

used, touch the timer “-” or “+” controls and a beep signals the function. The display shows “00”. The Timer value can be decreased and increased by keeping

the nger on the controls “+” or “-”. After the Timer value selection, the display continue to blink for 10 seconds before the countdown starts.

When the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically. To deactivate the timer, select the cooking zone,

touch the Timer controls “-” and “+” simultaneously.

IMPORTANT:

- The dot blinking next to the power level display shows that the Timer function is active on that zone.

- The Timer is available for all the zones but one at a time.

Residual heat indicator.

These indicators alert the user when cooking zones are still hot.

If the display shows , the cooking zone is still hot. If the residual heat indicator of a given cooking zone is lit, that zone can be used, for example,

to keep a dish warm or to melt butter.

When the cooking zone cools down, the display goes off.

Special function

Some models have special functions:

Button

Function

Name

Visual

Indication

Description

Dual/Triple

zone

The control activates the double or triple zone (if

available). After positioning the pot/accessory on the

chosen cooking zone, switch on the hob and select the

cooking zone. Select the power level and touch the

control one time to activate the dual zone or two times to

activate the triple zone. To deactivate the function,

simply touch the same button. LEDs above the controls

are switched on only when the function is active for the

selected zone.

Boiling

Display shows:

Melting

Display shows:

This function sets a power level that is suitable for slowly

melting delicate products without compromising their

sensorial quality (chocolate, butter, etc.). After

positioning the pot/accessory on the chosen cooking

zone, switch on the hob, select the cooking zone and

touch the melting control. To deactivate the function,

simply press the same button or touch "-" and "+" to

switch o the zone. It is possible to use this function in

combination with dual/triple zone function.

This function sets the zone maximum power (for

example to quickly bring water to the boil). After

positioning the pot/accessory on the chosen cooking

zone, switch on the hob, select the cooking zone and

touch the boiling controls. After 10 minutes of usage of

this function, the appliance automatically sets the zone

to level 9. To deactivate the function simply touch the

same control or lower the power level with "-". It is

possible to use this function in combination with dual/

triple zone function.

Power indicator display

Selected cooking zone indication

(the dot blinks when there is a Timer active on that zone)

WARNING

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Whirlpool CTAR 7743/2 IN Instruction for Use Page 7

Comments to this Manuals

Related products and manuals for Hobs Whirlpool CTAR 7743/2 IN