Whirlpool AGS 840/WP Installation Manual download pdf (Page 25)

PROBLEM POSSIBLE CAUSES SOLUTION

11) Pan does not free cubes or remains in

am intermediary position.

A) Cam motor disconnected or in bad

condition.

A) y B) Connect or replace cam

motor.

ALWAYS change pin and wheel.

B) Flexible pin or cam wheel broken.

12) Pan goes up and down constantly. A) Agitator motor micro-switch badly

connected or faulty.

A) Connect or replace micro-switch.

B) Security micro badly connected or

faulty.

B) Connect or replace micro-switch.

C) Faulty rele C) Replace rele.

13) The evaporator gets cold. And there is A) Water supply turned off. A) Turn on.

no water in the pan. B) Foreign bodies in water supply. B) Clean water entry filters.

C) The buoy wrongly positioned C) Adjust buoy.

D) Faulty buoy micro-switch. D) Replace micro-switch.

E) Faulty water intake electrovalve. E) Replace electrovalve.

1 2 ... 20 21 22 23 24 25

No comments

Whirlpool AGS 840/WP Installation Manual Page 25