Whirlpool JT 356 BL Instruction for Use download pdf (Page 6)

6

CLOCK

Clock timeout: each step must be

accomplished within 60 seconds. Else,

the display will return to stand by mode

automatically.

1. Press the Clock button (3 seconds) until

the left-hand digit (hour’s) flicker.

2. Press the +/- buttons to set the hours.

3. Press the Clock button again. (The two

right hand digits (minutes) flicker).

4. Press the +/- buttons to set the minutes.

5. Press the Clock button again.

The Clock is set and in operation.

Note: When the appliance is first plugged

in or after a power failure, the display is

blank. If the clock is not set, the display will

remain blank until the cooking time is set.

START PROTECTION / CHILD LOCK

This automatic safety function is

activated one minute after the oven has

returned to “stand by mode“. (The oven is in

“stand by“ when the 24-hour Clock is

displayed, or if the Clock has not been set,

when the display is blank).

PAUSE OR STOP COOKING

To pause cooking:

The cooking can be paused

to check, turn or stir the

food by opening the door.

The setting will be

maintained for 10 minutes.

To continue cooking:

Close the door and press the Start

button

ONCE. The cooking is

resumed from where it was paused.

Pressing the Start button TWICE will

increase the time by 30 seconds.

If you don’t want to continue

cooking:

Remove the food, close the door

and press the STOP button

A beep will signal once a minute

for 10 minutes when the cooking is

finished. Press the STOP button or open the

door to cancel the signal.

Note: The oven will only hold the settings

for 60 seconds if the door is opened and

then closed after the cooking is finished.

The door must be opened and closed e.g.

putting food into it, before the safety lock is

released. Else the display will show “door“.

1

3

5

2

4

If you wish to remove the clock from the

display once it has been set. Simply press

the Clock button (3 seconds) until the left-

hand digit (hour’s) flicker. Then press the

Stop button.

To reinstate the clock, follow the above

procedure.

1 2 3 4 5 6 7 ... 20

Comments to this Manuals

No comments