Whirlpool KN3G660SA(X)/U S Instruction for Use download pdf (Page 15)

Only available in certain models.

Timer feature

This function may be accessed by pressing the 

button, after which the display will show the symbol

. Every time the + button is pressed it corresponds

to a time increase of 10 seconds, until it reaches 99

minutes and 50 seconds. After this point, each press of

the button represents an increase of one minute, up to a

maximum of 10 hours.

Pressing the - button reduces the time.

After the time period has been set, the timer will begin

to count down. When the timer reaches zero, the

buzzer will sound (this may be stopped by pressing

any button).

The time may be displayed by pressing the



button,

and the  symbol indicates that the timer function has

been set. After approximately 7 seconds, the display will

automatically revert to the timer.

Cancelling a time that has already been set

Press the - button until the display shows 0:00.

Adjusting the buzzer volume

After selecting and confirming the clock settings, use

the - button to adjust the volume of the alarm buzzer.

Planning cooking with the electronic

programmer*

Setting the clock

After the appliance has been connected to the

power supply, or after a blackout, the display will

automatically reset to 0:00 and begin to blink. To set

the time:

1. Press the COOKING TIME button

and the

COOKING END TIME simultaneously.

2. Within 4 seconds of having pressed these buttons,

set the exact time by pressing the + and - buttons.

The + button advances the hours and the



- button

decreases the hours.

Once the time has been set, the programmer

automatically switches to manual mode.

Setting the timer

The timer enables a countdown to be set, when the

time has elapsed a buzzer sounds.

To set the timer proceed as follows:

1. press the TIMER button

. The display shows:

.

2. Press the + and - buttons to set the desired time.

3. When the buttons are released the timer begins

Practical cooking advice

Cooking on several shelves simultaneously

If it is necessary to use two racks, use the FAN

ASSITED mode , as this is the only cooking mode

suited to this type of cooking. We also recommend

that:

• Positions 1 and 5 are not used. This is because

excessive direct heat can burn temperature

sensitive foods.

• Positions 2 and 4 are used and that food that

requires more heat is placed on the rack in position

• When cooking foods that require different cooking

times and temperatures, set a temperature

that is halfway between the two recommended

temperatures (see Oven cooking advice table) and

place the more delicate food on the rack in position

4. Remove the food that requires a shorter cooking

time first.

• When cooking pizzas on several racks with the

temperature set to 220°C, the oven is preheated for

15 minutes. Generally speaking, cooking on the rack

in position 4 takes longer: we recommend that the

pizza cooked on the lowest rack position is removed

first, followed by the pizza cooked in position 4 a few

minutes later.

• Place the dripping pan on the bottom and the rack

on top.

Electronic timer*

This function displays the time and works as a timer

which counts down to zero.

! All functions will be implemented approximately 7

seconds after they have been set.

Resetting the clock

After the appliance has been connected to the power

supply, or after a power cut, the clock display will

begin to blink, showing the figure: 0:00

• Press button



and then buttons

and

to set the

exact time. Press and hold the buttons to quicken

the count upwards.

Any necessary modifications can be made by

repeating the above process.

1 ... 14 15 16 ... 80

Comments to this Manuals

No comments

Whirlpool KN3G660SA(X)/U S Instruction for Use Page 15

Comments to this Manuals

Related products and manuals for Microwaves Whirlpool KN3G660SA(X)/U S