Whirlpool MW C00 S Instruction for Use download pdf (Page 2)

2

INSTALLATION

PRIOR TO CONNECTING

Check that the voltage on the rating plate

corresponds to the voltage in your home.

AFTER CONNECTING

Do not remove the microwave inlet

protection plates located on the side of the

oven cavity wall. They prevent grease & food

particles from entering the microwave inlet

channels.

Ensure that the appliance is not damaged.

Check that the oven door closes ﬁ rmly against

the door support and that the internal door

seal is not damaged. Empty the oven and clean

the interior with a soft, damp cloth.

Important!

A permanent connection requires the

installation of a separating device. The

separating device must have an omnipolar

contact opening of more than 3 mm including

LS switches, safety valves and relays. The

separating device must be connected directly

to the terminal.

The manufacturers are not liable for any

problems caused by the user’s failure to

observe these instructions.

The earthing of this appliance is compulsory.

The manufacturer will accept no responsibility

for injury to persons, animals or damage to

objects arising from the non-observance of this

requirement.

In the case of a permanent connection, the

appliance should be installed by a qualiﬁ ed

technician.

Ensure the oven cavity is empty before

mounting.

Do not operate this appliance if it has

a damaged mains cord or plug, if it is not

working properly, or if it has been damaged

or dropped. Do not immerse the mains cord

or plug in water. Keep the cord away from hot

surfaces. Electrical shock, ﬁ re or other hazards

may result.

Follow the supplied separate mounting instructions

when installing the appliance.

The oven can be operated only if the oven

door is ﬁ rmly closed.

1 2 3 4 5 6 7 ... 19 20

Comments to this Manuals

No comments