Whirlpool XF 995.3 /HA Instruction for Use download pdf (Page 14)

Installation

Important: The power supply to the appliance must

be cut off before any adjustments or maintenance

work is done on it.

Installation of Built-in Ovens

To ensure the proper working order of the built-in

appliance, the kitchen unit must be of a suitable

size.

The sizes of the unit for installing the cooker under a

worktop or in a column unit are shown in figure.

min. 45 mm.

To provide adequate ventilation, there must be

appropriate ventilation openings in the front bottom

and the top part of the cabinet (an intake opening on

the bottom of at least 200 cm2, and an exhaust

opening of at least 90 cm2). The unit panels next to

the cooker must be heat resistant. In the case of

veneered wood units, glues must be resistant to a

temperature of 120 °C. In accordance with safety

standards, once the appliance has been mounted,

there must be no possible contact with electrical

parts. Any protective parts must be secured so that

they can only be removed with the use of tools.

Fastening the oven

Insert the appliance into the compartment; open the

oven door and fasten the oven to the cabinet using

the four screws “A”, remembering to place the

special spacers provided between the hole and the

screw itself.

447

in.

550

472 mm

475 mm

860 mm

22 mm

895 mm

525

469 mm

850 mm

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

No comments

Whirlpool XF 995.3 /HA Instruction for Use Page 14