Whirlpool AMD 081 Instruction for Use download pdf (Page 7)

FUNCTION DESCRIPTIONS

6th Sense mode

The air conditioner automatically selects Cooling

or Dry mode,depending on room temperature and

sets the target temperature.

Operation mode and temperature are determined

by indoor temperature.

Cooling only models

NOTE: Temperature, airflow and direction are

controlled automatically in 6th Sense mode.

However, a decrease or rise of up to 2°C can be

set with the remote control if you still feel

uncomfortable.

1. Press 6th Sense button.

2. In Fan Only mode, press Fan to select High, Mid

or Low.

Rapid Cool

Used for fast cooling. The air conditioner

automatically sets the fan speed to High and the

temperature to 18ºC.

NOTE: 6th Sense mode button does not operate

when Rapid Cool function is selected.

1. Press Rapid Cool. The air conditioner

automatically sets the fan speed to High and the

temperature to 18°C.

2. To exit Rapid Cool mode, press any button

except Timer On/Off and Swing button.

Fan Speed

1. Choose desired fan speed.

• Auto-automatically controls fan speed

depending on current room temperature and

temperature control setting.

NOTE: Auto fan speed cannot be selected in Fan

Only mode.

• High - for maximum cooling

• Mid - for normal cooling

• Low - for minimum cooling

Temperature

• Press the plus button to raise the temperature.

Press the plus button once to increase the set

temperature by 1ºC, or press twice to increase

the set temperature by 2ºC.

• Press the minus button to lower the

temperature. Press the minus button to

decrease the set temperature by 1ºC, or

press twice to decrease the set temperature

by 2ºC.

NOTES:

• In the Cooling mode, the temperature can be

set between 18ºC and 32ºC.

• In Fan Only mode, the temperature cannot be

set.

Indoor

temperature

Operation

mode

Target

temperature

26°C or below DRY

Room

temperature

decrease 1.5°C

after operating

for 3 minutes

Over 26°C COOLING 26°C

10

1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments