Whirlpool AMD 081 Instruction for Use download pdf (Page 8)

Sleep mode

Press Sleep button on remote control, the

appliance operates in sleep mode and the fan speed

is automatically set to low speed.

NOTES:

• In Cooling mode if the current room

temperature is 26ºC or higher the set

temperature will not change when Sleep mode is

activated, otherwise, the temperature will

automatically increase 1ºC during the first hour.

• The set temperature will not increase during the

last 7 hours in Sleep mode.

1. Press MODE to select Cooling or Dry.

NOTE: Sleep mode cannot be selected when Fan

Only is selected.

2. Press Fan button .

3. Press the or button to set the

temperature.

4. Press SLEEP. After 5 seconds, the lights on the

control panel display will dim.

NOTES:

• The temperature and airflow direction can be

adjusted during Sleep Mode.

• To turn off Sleep mode, press MODE, ON/OFF,

6th SENSE, JET or SLEEP again or wait 8 hours

for the air conditioner to turn off automatically.

Changing Air Direction

On Remote Control or Control Panel

Press SWING once to change vertical airflow

direction. Press again to stop airflow louver at

desired airflow direction.

Normal Sounds

When your air conditioner is operating normally,

you may hear sounds such as:

• Air movement from the fan.

• Clicks from the thermostat cycle.

• Vibrations or noise due to poor wall or window

construction.

• A high-pitched hum or pulsating noise caused by

the modern high-efficiency compressor cycling

on and off.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Whirlpool AMD 081 Instruction for Use Page 8