Whirlpool YGSC278 Use and Care Guide download pdf (Page 6)

ELECTRONIC OVEN CONTROL

Displays

When power is first supplied to the appliance, everything on both

displays will light up for 5 seconds. Then, “PF id = 27” or “PF id =

30” will appear on the lower oven display. Press OFF/CANCEL to

clear display.

Any other time “PF id = 27” or “PF id = 30” appears, a power

failure occurred. Press OFF/CANCEL and reset the clock if

needed.

Lower Oven Display

When the lower oven is in use, this display shows the lower oven

temperature, heat source(s) and start time.

During lower oven Timed Cooking, this display also shows a

vertical bar and minute time countdown and the stop time (if

entered).

If “Err” appears on the display, an invalid pad was pressed.

Press OFF/CANCEL and retry your entry.

When the lower oven is not in use, this display is blank.

Upper Oven Display

When the upper oven is in use, this display shows the upper oven

heat source(s), cooking power, quantities, weights and/or help

prompts.

If “RETRY” flashes on the display for one second, an invalid pad

was pressed. Retry your entry.

When the upper oven is not in use, this display shows the time of

day or Timer countdown.

Start/Enter

The lower oven START/ENTER pad begins any lower oven

function except the Timer. If not pressed within 5 seconds after

pressing a pad, “START?” will appear on the lower oven display

as a reminder. If not pressed within 5 minutes after pressing a

pad, the oven display will return to inactive mode (blank) and the

programmed function will be cancelled.

Off/Cancel

The lower oven OFF/CANCEL pad stops any lower oven function

except for the Clock, Timer and Control Lock.

The cooling fan may continue to operate even after the lower

oven OFF/CANCEL is pressed depending on the oven

temperature.

Clock

This is a 12 hour clock and does not show a.m. or p.m.

To Set:

Before setting, make sure the ovens, Timer and Timed Cooking

are off.

Press CLOCK.

Press the number pads to set the time of day.

Press CLOCK, START/ENTER or ADD MINUTE START.

To remove the time of day from the display:

Press and hold

CLOCK for 5 seconds.

To return the time of day to the display:

Press CLOCK. The

time should not have to be reset.

Tones

Tones are audible signals, indicating the following:

One tone

■ Valid pad press

■ Oven is preheated

■ Function has been entered

Three tones

■ Invalid pad press

Four tones

■ End-of-cycle

■ Reminder, repeating each minute after the end-of-cycle tones

Lower Oven Display

Number Pads

Upper Oven Display

Clock

Timer

Lower Oven Selectors

Timed Cooking

Lower Oven Start/Enter [Control

Lock] and Lower Oven Off/Cancel

Oven Light

10.

Upper Oven Control

(see separate Use and Care Guide)

1 2 3 4 5

6 7 108 9

1 2 3 4 5 6 7 ... 16

Comments to this Manuals

No comments

Whirlpool YGSC278 Use and Care Guide Page 6

Comments to this Manuals

Related products and manuals for Ovens Whirlpool YGSC278