Whirlpool ADN 240 Instruction for Use Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
10
ENGLISH
GB
Temperature Shock Freezing (+90 à-18°C)
v Select shock freezing by pressing the
key until S1 and S4 LEDs light up.
v Insert the needle probe into the product.
v Start the cycle by pressing key
This information appears on the display:
As soon as the needle probe detects
the temperature of -18°C, the shock-freezing time
is completed and a preserving cycle is
automatically started: the display of “END, an
intermitting 5-seconds sound and LED S3 that
goes on confirm the correct conclusion of the
cycle.
The alternate
visualisation of “END/OUT on the display shows
that the cycle is completed past the MAX time of
270 minutes. Press to detect the effective
time taken.
The display of OUT on the display,
alternated to time value 00.00, means that, at the
end of the MAX. time of 270 minutes, the cycle
was not yet concluded. Wait for END/OUT
messages to alternately appear on the display;
then, press to show the effective time taken.
Press to conclude the preservation cycle.
Time Shock Freezing (+90 à-18°C)
v Select blast chilling by pressing key
until S1 and S5 LEDs light up.
v Set the required shock freezing time using
keys and .
v Start the cycle by pressing the key.
At the end of the set time, the shock
freezing time is concluded and the preserving
cycle is automatically started: the display of
“END”, an intermitting 5-seconds sound and LED
S3 that goes on confirm the correct conclusion of
the cycle.
Press to conclude the preservation cycle.
Defrosting
v Make sure the machine is in STOP mode.
v Press key for defrosting.
The "DEF" message on the display
indicates a defrosting cycle is in progress.
Defrosting is performed by forced ventilation using
the evaporating fans; the cycle may be performed
with the door open or closed and be interrupted at
any time by pressing the key.
1
3
2
2
1
2
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 33 34

Comments to this Manuals

No comments