Whirlpool ADN 240 Instruction for Use download pdf (Page 8)

ENGLISH

i All maintenance interventions that require

precise technical skill or particular ability must be

performed exclusively by qualified staff.

! When using the appliance, never obstruct the

air inlet when the appliance is on, so as not to

compromise its performance and safety.

! Never stretch the power cable.

In order to guarantee hygiene and protect the

foodstuffs from contamination, the elements that

come into direct or indirect contact with the

foodstuffs must be cleaned very well along with

the surrounding areas. These operations must

only be performed using detergents that can be

used with foodstuffs, avoiding inflammable

products or those that contain substances that are

harmful to personal health.

In the case of prolonged inactivity, as well as

disconnecting all the supply lines, it is necessary

to accurately clean all internal and external parts

of the appliance.

4.1. Safety Devices

During the running of appliance, some control

devices may activate and govern the correct

running of the machine. In other cases, they may

deactivate parts or the whole machine, to put the

appliance in safe conditions. Main controls are

described below.

Door micro switch

If the door is opened, the

magnetic switch placed on the control board

opens and, during blast-chilling or shock-freezing,

evaporator fans go off and a warning message

appears on the display at the same time. This

condition may also be determined when the door

is not perfectly aligned to or near the control

board: in this case with machine in STOP phase,

cycle start-up is prevented, apart from start-up of

the defrosting cycle.

Protective Fuses

Some protection fuses in the general power

supply line are activated in case of overload.

High condensation temperature alarm

In the event of room

conditions or functional failures, which cause the

condenser to exceed the maximum temperature

value, an alarm is triggered and stops the

machine running. The machine can be run when

an acceptable temperature value is reset.

Evaporator Fan Micro switch

If the deflector is opened to

inspect the evaporator or fans this micro switch

positioned on the evaporator deflector deactivates

machine functioning. Closure of the deflector with

the successive disappearance of the alarm on the

display, restores normal machine functioning.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

Comments to this Manuals

No comments

Whirlpool ADN 240 Instruction for Use Page 8

Comments to this Manuals

Related products and manuals for Power heat guns Whirlpool ADN 240