Whirlpool 9754384 User Manual Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
22
To Replace:
1.
Align the drawer glides with the receiving guides.
2.
Push drawer in all the way.
3.
Gently open and close the drawer to ensure it is seated
properly on the slides.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of
an unnecessary service call.
Nothing will operate
Is the power supply cord unplugged?
Plug into a grounded outlet.
Has a household fuse been blown or has the circuit
breaker been tripped?
Replace the fuse or reset the circuit.
Cooktop will not operate
Is the control knob set correctly?
Push in knob before turning to a setting.
On ceramic glass models, is the Cooktop Lockout set?
See Cooktop Lockout section.
Excessive heat around cookware on cooktop
Is the cookware the proper size?
Use cookware about the same size as the surface cooking
area, element or surface burner. Cookware should not extend
more than 1 in. (2.5 cm) outside the cooking area.
Hot Surface indicator light stays on
Does the Hot Surface indicator light stay on after control
knob(s) have been turned off?
See Cooktop Controls section.
Cooktop cooking results not what expected
Is the proper cookware being used?
See Cookware section.
Is the control knob set to the proper heat level?
See Cooktop Controls section.
Is the appliance level?
Level the appliance. See the Installation Instructions.
Oven will not operate
Is the electronic oven control set correctly?
See Electronic Oven Control section.
Has a delay start been set?
See Timed Cooking section.
On some models, is the Control Lock set?
See Control Lock section.
Oven temperature too high or too low
Does the oven temperature calibration need adjustment?
See Oven Temperature Control section.
On some models, does the cooling fan run during BAKE,
BROIL or CLEAN?
It is normal for the fan to automatically run when the oven is
in use. These helps cool the electronic control.
Oven indicator lights flash
Do the oven indicator lights flash?
See the Oven Indicator Lights section. If the indicator
light(s) keeps flashing, call for service. See Assistance or
Service section.
Display shows messages
Is the display showing PF?
There has been a power failure. Clear the display. See
Display(s) section. On some models, reset the clock, if
needed. See Clock section.
Is the display showing a letter followed by a number?
Depending on your model, press OFF/CANCEL, OFF or
CANCEL/OFF to clear the display. See Display(s) section. If
it reappears, call for service. See Assistance or Service
section.
Self-Cleaning cycle will not operate
Is the oven door open?
Close the oven door all the way.
Has the function been entered?
See Self-Cleaning Cycle section.
On some models, has a delay start Self-Clean cycle been
set?
See Self-Cleaning Cycle section.
Has a delay start been set?
See Timed Cooking section.
Page view 21
1 2 ... 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments