Whirlpool FES310B User Manual download pdf (Page 30)

IF YOU NEED ASSISTANCE OR SERVICE

PROBLEM POSSIBLE CAUSE

SOLUTION

Control knob(s)

will not turn

You are not pushing in

before trying to turn.

Push control knob(s) in before turning to

a setting.

Self-Cleaning

cycie will not

operate

The Oven Selector and

Oven Temperature Control

Knob are not set to CLEAN.

Set both the Oven Selector and Oven

Temperature Control Knob to CLEAN.

The range clock does not

show the correct time

of day.

Reset clock to show the con-ect time of

day. (See page 11.)

The Lock Lever is not in

the CLEAN position - all

the way to the right.

Move the Lock Lever all the way to

the right.

The Start Time Knob does

not show the correct time

of day or the knob is not all

the way out.

Reset the Start Time Knob to show the

correct time of day. Pull knob out all

the way.

The Stop Time Knob is not

set ahead to the time you

want the Self-Cleaning

cycle to stop.

See Step 3 in “Setting the controls” on

page 22 for proper setting instructions.

Cooking

results are not

The range is not level.

Level range. (See Installation Instruc

tions.)

what you

expected

The oven temperature

seems too low or too high.

Adjust the oven temperature control.

(See “Adjusting the oven temperature

contror on page 13.)

The oven was not pre

heated as the recipe

calls for.

Preheat oven if called for in recipe.

The recipe has never been

tested or is not from a

reliable source.

Use only tested recipes from a reliable

source.

The pan used is not the

type or size recommended

in the recipe.

Refer to a reliable cookbook for recom

mended pan type and size.

There is not proper air

circulation around pan

when baking.

Allow 1V2 to 2 inches (4-5 cm) on all

sides of the pans for air circulation.

There must be a minimum space of

1 inch (3 cm).

The cooking utensils are

not the proper shape or do

not fit the surface units

being used.

Use cooking utensils with snnooth, flat

bottoms that fit the surface units

being used.

30

1 ... 29 30 31 32

Comments to this Manuals

No comments