Whirlpool KRFC 9035 Instruction for Use download pdf (Page 26)

Regulations require that the appliance is earthed. The manufacturer declines all liability for injury to

persons or animals and for damage to property resulting from failure to observe this or any other

instructions.

Installation and electrical connection must be carried out by a qualified engineer according to the

manufacturer’s instructions and local safety regulations.

Ensure that the voltage indicated on the appliance data plate corresponds to the mains voltage.

The plug of the appliance must be easily accessible even after installation so that the appliance can be

unplugged if necessary.

If this is not possible, connect the appliance to the mains supply by means of a two-pole switch with

minimum break distance between contacts of 3 mm, fitted at an easily accessible point.

If the power supply cable plug and socket are not of the same type, replace the socket (this must be done

by a competent, qualified person).

Do not use extension leads or adapters.

After installation, check that the appliance is not crushing the power supply cable.

Disconnect the appliance from the power supply by unplugging it. Do not pull the power supply cable.

Electrical connection

Warning - this appliance must be earthed

Fuse replacement

If the mains lead of this appliance is fitted with a BS

1363A 13amp fused plug, to change a fuse in this

type of plug use an A.S.T.A. approved fuse to BS

1362 type and proceed as follows:

1. Remove the fuse cover (A) and fuse (B).

2. Fit replacement 13A fuse into fuse cover.

3. Refit both into plug.

Important:

The fuse cover must be refitted when changing a

fuse and if the fuse cover is lost the plug must not

be used until a correct replacement is fitted.

Correct replacement are identified by the colour

insert or the colour embossed in words on the

base of the plug.

Replacement fuse covers are available from your

local electrical store.

For the Republic of Ireland only

The information given in respect of Great Britain

will frequently apply, but a third type of plug and

socket is also used, the 2-pin, side earth type.

Socket outlet / plug (valid for both countries)

If the fitted plug is not suitable for your socket

outlet, please contact KitchenAid Service for

further instruction. Please do not attempt to

change plug yourself. This procedure needs to be

carried out by a qualified technician in compliance

with the manufactures instructions and current

standard safety regulations.

Electrical connection for Great Britain and Ireland only

1 2 ... 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Whirlpool KRFC 9035 Instruction for Use Page 26

Comments to this Manuals

Related products and manuals for Side-by-side fridge-freezers Whirlpool KRFC 9035