Whirlpool UH8 F1C X Instruction for Use download pdf (Page 4)

1. INSTALLATION

1.1. INSTALLING SINGLE APPLIANCE

To guarantee adequate ventilation, leave a space on

both sides and above the appliance.

The distance between the rear of the appliance and the

wall behind the appliance should be at least 50mm.

A reduction of this space will increase the Energy

consumption of product.

1.2. INSTALLING TWO APPLIANCES

During installing the freezer

and the fridge

together ensure that the freezer is located on the left

and the fridge on the right (as shown on the drawing).

Left side of refrigerator is equipped with special device

in order to avoid condensation problems between

appliances.

We recommended installing two appliances together

using the linking-kit

(as shown on the drawing). You

can buy it in Service.



To level the doors using the adjustable lower hinge

(select models)

If the refrigerator door is lower than the freezer door,

raise the refrigerator door by turning the adjustment

screw counterclockwise using a M10 wrench.

If the freezer door is lower than the refrigerator door,

raise the freezer door by turning the adjustment screw

counterclockwise using a M10 wrench.

*Available on selected models only. Please check on the QUICK START GUIDE if this function is actually available on your model.

50mm

5 mm

max

1 2 3 4 5 ... 24

No comments

Whirlpool UH8 F1C X Instruction for Use Page 4