Whirlpool AMD 335 Instruction for Use download pdf (Page 20)

21

INSTALLATION SERVICE

Before installation

1. Please read this manual carefully before

installation.

2. The appliance must be installed according to

national wiring rules and according to this

manual by qualified technicians.

3. Any change of installation position must be

handled by professionals;

4. Check the product to verify that it has not been

damaged before installation.

5. Mount with the lowest moving parts of indoor

unit at least 2.5m above floor or grade Level.

6. After installing, the consumer must operate the

appliance correctly according to this manual,

keep a suitable storage for maintenance and

move of it in the future.

SAFETY PRECAUTION

1. The power supply must be of rated voltage

with special circuitry for the appliance. The

normal operating range of voltage is

90%~110% of rated voltage. The diameter of

the power cord must comply with

requirements.

2. The user power supply shall have a reliable

grounding terminal. It is prohibited to connect

the grounding wire to the following items: 1)

Water Supply Pipe 2) Gas Pipe 3) Sewage Pipe

4) Other positions that are considered unsafe

3. Ensure safe grounding and a grounding wire

connected with the special grounding system of

the building, installed by professionals. The

appliance must be fitted with electrical leakage

protection switch and an air switch with

sufficient capacity (Refer to the following

chart). The air switch must also have a

magnetic and a thermal tripping function to

ensure protection in case of short-circuit and

overload.

4. Make sure that the power supply cord is long

enough to allow the right connection. Do not

use any extension cord for power supply.

5. If the supply cord is damaged, it must be

replaced by the manufacturer or its service

agent or a similarly qualified person in order to

avoid a hazard;

6. An all-pole disconnection switch having a

contact separation of at least 3mm in all poles

should be connected in fixed wiring.

7. Risk of electric shock can cause injury or death:

Disconnect all electric power supplies before

servicing.

8. The connection of power cord and the cable

connection between indoor unit and outdoor

unit shall be in accordance with the wiring

diagram attached on the appliance.

9. Once installation is completed, the electric

components must not be accessible to the

users.

10. Use two or more people to move and install

the appliance to avoid excessive weight hazard.

11. After unpacking the air conditioner, keep all

packaging materials well out of the reach of

children.

Ty p e Model

Required Capacity of air

break switch

On/Off

18k 25A

24k 32A

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27

Comments to this Manuals

No comments