Whirlpool AMD 335 Instruction for Use download pdf (Page 24)

OUTDOOR UNIT INSTALLATION

WIRING DIAGRAM

1. Install Drain Port and Drain Hose

The condensate drains from the outdoor unit when

the unit operates in heating mode. In order not to

disturb your neighbours and protect the

environment, install a drain port and a drain hose to

direct the condensate water. Just install the drain

port on the chassis of the outdoor unit, then

connect a drain hose to the port as shown in the

figure on the right .

2. Install and Fix Outdoor Unit

Fix with bolts and nuts tightly on a flat and strong

floor. If installed on the wall or roof, make sure to

fix the supporter well to prevent it from shaking due

to serious vibration or strong wind.

3. Outdoor Unit Piping Connection

• Remove the valve caps from the 2-way and 3-way valve.

• Connect the pipes to the 2-way and 3-way valves separately according to the required torque.

4. Outdoor Unit Cable Connection (see previous page)

Chassis

Drain port

Drain hose

(prepare by user)

18K/24K Models

Note:

For 18k, 24k models, the power supply are connected from indoor unit with a circuit breaker.

For some models, the ground wire may be connected to the electric box directly.

Power connecting cord

Indoor unit

Te r m i n a l

Outdoor unit

Te r m i n a l

Brown

Blue

Brown

Blue

Yellow/Green

Electric Box

1 2 ... 19 20 21 22 23 24 25 26 27

No comments

Whirlpool AMD 335 Instruction for Use Page 24