Whirlpool Compactors User Manual download pdf (Page 53)

Fig. A Fig. B

DISWASHER COMPONENT TESTING AND/ORDISWASHER COMPONENT TESTING AND/OR

DISWASHER COMPONENT TESTING AND/OR

DISASSEMBLYDISASSEMBLY

DISASSEMBLY

Wetting Agent and Detergent Dispensers

Introduction

The purpose of the wetting agent dispenser and detergent dispenser is to release the detergent and

wetting agent at the appropriate times during the wash and/or rinse cycles.

Dishwasher Dispenser Disassembly

1. Remove the drawbar spring.

(Fig. A)

2. Align the lower drawbar holes with the locking tabs and remove the upper and lower drawbars.

As you do, note the locating tabs behind them and how they align with their respective locating

holes.

(Fig. B)

3. Slide the drawbars apart.

(Fig. C)

4. Turn the wet agent cap and seal assembly counterclockwise and remove it.

(Fig. D)

5. Remove the seal from the cap.

6. Use Special Tool - Part No. 303918 or a ¾” socket to press over the attaching tabs

in the wet agent cap opening. Remove wet agent dispenser assembly.

7. Remove wet agent dispenser actuator by spreading the two (2) locking tabs.

(Fig. E)

8. Remove the upper and lower slides from the wet agent dispenser actuator.

9. Remove the diaphragm spring and diaphragm.

10. Use a screwdriver to gently release the lower tab and remove the detergent door

actuator assembly. As you do, note the position of the door latch level through the hole in the

lower slide.

(Fig. F)

11. Remove the upper slide, the slide spring and the lower slide.

(Fig. G)

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 101 102

No comments

Whirlpool Compactors User Manual Page 53