Whirlpool FFCR70110 Instruction for Use download pdf (Page 11)

5. Add detergent

Pull out the detergent dispenser and add detergent

(and additives/softener) into the relative compartments

as described in section “DETERGENT DISPENSER”.

Observe the dosing recommendations on the

detergent pack.

Correct dosing of detergent / additives is important, because:

• itoptimizesthecleaningresult.

• itavoidsirritatingresiduesofsurplusdetergentinyour

laundry.

• itsavesmoneybyavoidingwasteofsurplusdetergent

•itprotectsthewashingmachinebyavoidingcalcification

of components.

• it respects the environment by avoiding unnecessary

environmental burden.

6. Delaying the start of a programme

•Tosetaprogrammetostartatalatertime,seethesection

“OPTIONS/STARTDELAY”.

7. Start programme

• Pressthe“Start/Pause” .Therelativeindicatorlamp

illuminates, the door locks and the “Door locked”

indicator lights up.

•Toavoidoverflow,donotopenthedetergentdispenser

during a running programme anymore.

• The remaining programme duration can vary. Factors

like unbalance in the wash load, or foam formation, can

have an eect on the programme duration.

8. Change the settings of a running programme, if

needed

You can still change the settings while a programme is

running. The changes will be applied, provided the

respective programme phase has not finished yet.

To change the settings of a running programme:

• Press“Start/Pause” toputtherunningprogramme

on pause.

• Changeyoursettings.

• Press“Start/Pause”againtocontinuethe

programme.

If you have changed the programme, do not add detergent

for the new programme.

To prevent that a running programme is changed by accident

(for instance by children), use the “Key lock” (see section

“FUNCTIONS”).

Pause a running programme and open the door, if

needed

•Press“Start/Pause”  topausearunningprogramme.

• Providedwaterlevelortemperatureisnottoohigh,the

“Door locked” indicator light turns o. You can open the

door, for example to add more laundry, or to remove

laundry which was loaded by mistake.

•Press“Start/Pause” toproceedwiththeprogramme.

9. Cancelling a running programme, if needed

• Press and hold the “ON/OFF“ button until the

washing machine stops.

• Ifthewaterlevelandtemperaturearelowenough,the

door unlocks and may be opened.

• Thedoorremainslockedifthereiswaterinthedrum.

To unlock the door, switch the washing machine on,

select the “Spin & Drain” programme and turn the spin

option off by setting the spin speed to “0“.

•Thewaterisemptiedandthedoorunlocksattheendof

the programme.

10. Switch off the washing machine after programme

End

• Attheendofthecycle,themessage“END”isshownon

the display.

• Thedoorcanonlybeopenedwhenthesymbol“Door

locked” light turns o.

• Check thatthe“Door locked”  indicator is o, then

open the door and take out the laundry.

• Press“ON/OFF”toswitchthewashingmachineo.

To save energy, if the washing machine is not switched

off manually with the button, it turns off automatically

approximately 30 minutes after the end of the programme.

Leavethedoorajartolettheinteriorofthewashingmachine

to dry.

User manual

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 20 21

Comments to this Manuals

No comments

Whirlpool FFCR70110 Instruction for Use Page 11

Comments to this Manuals

Related products and manuals for Washing machines Whirlpool FFCR70110