Whirlpool AWM 268 Instruction for Use

94 INSTALLATION INSTRUCTIONSMOBILITY WHEELS(for UK only)Depending on model, your washing machine is provided with mobility wheels.You will find these

85WHEN TO REMOVE THE FILTER•Check and clean the filter at least 2 or 3 times a year.•When the appliance does not drain or spin properly.•When the pump

84 Indicates the programme selected and the current step in the sequence.Green zone: Main wash.Black stripes: Rinse.Solid black zone: Final spin.“Stop

83(Depending on model, see also the separate programme chart).Prewash button •Only select for washing heavily soiled laundry (sand and grainy dirt).•T

82 SELECTING THE PROGRAMME(See also the separate programme chart and consumption data)1.Open the tap(s).2.Turn the programme selector knob to the desi

81FILLING THE DETERGENT AND ADDITIVESThe drawer will have three or four chambers depending on the appliance model.1.Pull out the detergent drawer.2.Fi

80 CHOOSING THE RIGHT DETERGENTThe type of detergent depends on:•the type of fabric (cottons, synthetics, delicates, wool, silk);Note: Use only specif

791. Sort the load according to:• Fabric type / care label symbolCotton, mixed fibres, synthetics, wool, silk, viscose.• Colours Separate coloured and

78 • PackingThe packaging is marked with the recycling symbol , signifying that it can be 100% recycled.• ApplianceThe appliance is made of recyclabl

771.Worktop2.Control panel3.Detergent drawer4.After-Sales Service sticker (inside door)5.Door6.Door handle-To open: press the button on the inside of

76 GB CONTENTSAPPLIANCE AND ACCESSORIESPAGE77PROTECTING THE ENVIRONMENTPAGE78SAFETY INSTRUCTIONSPAGE78MOVING AND TRANSPORTING THE APPLIANCEPAGE78SORTI

931) ELECTRICAL CONNECTIONS“Warning - this appliance must be earthed”This appliance is normally supplied with a mains lead having a plug fitted in the

75QUICK REFERENCE GUIDE GBBEFORE USING THE APPLIANCE FOR THE FIRST TIME:• IMPORTANT: MAKE SURE YOU HAVE READ THE “INSTALLATION INSTRUCTIONS”• REMOVE T

92 DRAIN HOSE•Drain hose connection to water outlet.1.Unhook the drain hose from the left clip, (see arrow A Fig. 1.) Do not loosen the drain hose con

91WATER SUPPLY•Water supply: only cold water.•Tap: 3/4" threaded hose connector.•Water pressure (mains pressure): 10-100 N/cm2 (1-10 bar).INLET H

90 INSTALLATION•Install the appliance on a solid and level floor surface, preferably in a corner of the room.•Make sure that all four feet are resting

89TRANSIT BOLTSThe appliance is fitted with transit bolts to prevent internal damage while it is being moved.Before using the appliance the transit bo

88 Machine vibrates during spin cycle:Check the following:-Is the machine perfectly horizontal with all four feet on ground? (see “Installation Instru

87The appliance is equipped with automatic safety functions able to quickly identify and indicate the presence of faults and react appropriately.Most

86 APPLIANCE EXTERIOR AND CONTROL PANEL•Clean using normal household detergent (do not use abrasive products).•Dry with a soft cloth.DETERGENT DRAWERD