Whirlpool Cabrio WTW8800YW0 Specifications download pdf (Page 49)

4-7

Continued on the next page.

c) Raise the cabinet top (see step 3e on

page 4-4 for the procedure).

d) Loosen the clamp and disconnect the

end of the dispenser hose from its wa-

ter inlet/dispenser valve connector.

NOTE: The dispenser hoses are per-

manently attached to the dispenser.

They are not intended to be removed.

4. To remove the fresh fill inlet valve:

a) Raise the cabinet top (see step 3e on

page 4-4 for the procedure).

Fresh Fill Inlet Valve Hose

Fresh Fill Inlet Valve Screw

Fresh Fill Inlet Valve

Dispenser Hoses

b) Loosen the clamp and disconnect the

end of the fresh fill inlet valve hose

from its water inlet/dispenser valve

connector (see the top right photo).

NOTE: The fresh fill inlet valve hose is

permanently attached to the inlet. It is

not intended to be removed.

5. To remove the lid lock:

a) Raise the cabinet top (see step 3e on

page 4-4 for the procedure).

b) Remove the two hex-head screws from

the lid lock and remove the lock.

c) Cut the indicated cable standoff from

the cabinet top.

d) Unclip the lid lock cable from the cabi

net top flange.

Lid Lock

Cable Standoff

Lid Lock Screws

c) Remove the screw from the fresh fill

inlet valve and remove the valve as

sembly.

Clip

Clips

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 83 84

No comments

Whirlpool Cabrio WTW8800YW0 Specifications Page 49