Whirlpool FMMR 10430 User's Guide Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
3
EN
4. SWITCH ON WASHING MACHINE
Press the On/O button until the programme button
lights up. An animation appears, and there is a sound.
Afterwards the washing machine is ready to be operated.
5. SET THE DESIRED PROGRAMME
GUIDED MODEthe button light guides you through setting your
programme in the following order: selection of programme /
temperature / spin speed / options. As soon as you conrm a
selection by pressing the knob, the button light will jump to the
next step.
Select programme:
Make sure that the programme button lights up. Turn the
knob to select the desired Programme.
Programme name and duration appear on the display.
Conrm the desired programme by pressing the knob. The
maximum possible laundry load for the selected programme is
indicated after a few seconds.
Change temperature, if needed
If you want to change the temperature indicated over the
temperature button, make sure that the Temperature button
lights up.
Turn the knob to select the desired temperature, then press the
knob to conrm.
Change spin speed, if needed
If you want to change the spin speed indicated over the
Spin button, make sure that the Spin button lights up.
Turn the knob to select the desired spin speed, or Rinse hold,
then press the knob to conrm.
Select options, if needed
Make sure that the options button lights up. The options
which are selectable for your programme are indicated by
lighting arrows.
Turn the knob to select the desired options. The symbol of the
selected option blinks. To conrm it, press the knob.
Some options / functions can be selected by directly pressing the
button:
Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more
information.
INDIVIDUAL MODE
After you have switched on the washing machine, you are not
forced to follow the GUIDED MODE.
It is up to you which order you choose to set your programme. To do
a setting, rst press the relevant button, then turn the knob to
select, and nally press the knob to conrm.
The range of temperatures, spin speeds and options depend on the
programme selected. Therefore it is recommended to start your
setting with selecting the programme.
6. ADD DETERGENT
If you do not use the Dosing Aid function, pull out the
detergent dispenser and add detergent (and additives/
softener) now, as indicated in section DETERGENT
DISPENSER.
Observe the dosing recommendations on the detergent pack. If
you have selected PREWASH or FINISH IN, observe the
recommendations in section OPTIONS, FUNCTIONS AND
INDICATORS. Afterwards carefully close the detergent dispenser.
If you use the “Dosing Aid” function, add detergent later, after
you have started the programme. Refer to section OPTIONS,
FUNCTIONS AND INDICATORS.
After having added detergent /additives, do not open the
detergent dispenser anymore, to avoid overow.
7. START PROGRAMME
Press and hold Start/Pause” until the button lights up
solidly; the programme starts.
If you have selected “Dosing Aid”, the washing machine will
indicate you the recommended detergent amount for your
laundry load after programme start. Follow the instructions as
indicated in section OPTIONS, FUNCTIONS AND INDICATORS /
Dosing Aid.
8. CHANGE A RUNNING PROGRAMME, IF NEEDED
You can still change the settings while a programme is running. The
changes will be applied, provided the respective programme phase
has not nished yet.
Press the relevant button (for example the “Spin speed” button to
change the spin speed). The value blinks for a few seconds.
While blinking, you can adjust the setting by turning the knob. If
the value stopped blinking, press the button again.
Press the knob to conrm the modication. If you do not conrm,
the modication is conrmed automatically – the modied setting
stops blinking
The programme will continue automatically.
To change the settings of a running programme, you can also
Press “Start/Pause to put the running programme on pause
Change your settings
Press “Start/Pause again to continue the programme.
9. PAUSE A RUNNING PROGRAMME AND OPEN THE
DOOR, IF NEEDED
Press and hold “Start/Pause to pause a running
programme.
Provided water level is not too high, or laundry is not too hot, the
door indicator lights up. You can open the door, for example
to add/remove laundry.
Close the door again and press “Start/Pause to proceed
with the programme.
10. RESET A RUNNING PROGRAMME, IF NEEDED
Press and hold the “On/O button until the display
indicates that the programme is cancelled.
The water drains, the programme ends and the door
unlocks.
11. SWITCH OFF THE WASHING MACHINE AFTER
PROGRAMME END
The display indicates that the cycle is nished, and the
“Door open indicator lights up – you can take out your laundry
Press “On/O to switch o the washing machine. If you do not
switch it o, the washing machine will switch o automatically
after about a quarter of an hour after programme end, to save
energy.
Leave the door ajar, so that the inside of the washing machine can
dry.
Page view 2
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments