Whirlpool FSCR 12440 User's Guide Page 10
- Page / 12
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
10
blinks a few times. You have to either rell the empty
tank(s), or dose the detergent manually.
In case you want to permanently deactivate the Auto
Dosing function (because you always prefer to dose
manually), press the Settings button, select Auto Dosing
and set the function to O. To be able to use the
function again later, it must be set to On.
IMPORTANT:
• Never ll the tanks with powder detergents; powder
can only be used for manual dosing
• Softener cannot be dosed manually; it can only be
used in Tank2 of the auto dosing system.
6
th
Sense Live Remote Control
The 6
th
Sense Live feature allows to remotely
monitor and control your washing machine using a
smartphone or a tablet. To use this feature you have
to successfully connect the machine to your home
wireless network and to the Internet by following the
set-up procedure described in the Use and Care Guide
(6
th
Sense Live Feature / Setup Procedure section).
You can monitor the status of your washing machine at
any time using the 6
th
Sense Live app. If you want to
control the appliance remotely (for example: to set and
start a programme), the Remote Control has to be
enabled.
To enable Remote Control:
• Make sure the router is on and connected to the
Internet.
• Switch on the washing machine.
• Load your laundry, close the door, add the
detergent and make sure the water tap is open.
• Make sure the Connection Status indicator is
solidly lit.
• Press the Remote Control button, the door locks
and the buttons and keys on the control panel are
disabled. The only controls still active are “Remote
Control”, “ON/OFF” and “Key Lock”.
• The washing machine is now in Remote Control mode
and is ready to be controlled via 6
th
Sense Live app.
• If you start a programme remotely, at the end of the
programme the washing machine will automatically
exit the Remote Control mode and will switch o.
To manually exit Remote Control:
• With the machine in Remote Control, press again the
Remote Control button. You will regain local control
over the control panel of the washing machine.
Rinse hold (selectable with Spin button)
Avoids automatic spinning of the laundry at the
end of the programme. The laundry remains in the
last rinse water, the display indicates the rinse hold
and the programme does not continue.
Suitable for delicate laundry which is not appropriate for
spinning, or which should be spun with a low spin
speed. Not suitable for silk.
To select “Rinse hold”:
• Press the spin button; select Rinse hold. The Rinse hold
symbol on the display lights up.
The display indicates when the programme has reached
the Rinse hold. Choose to:
• drain the water, no spin:
press the Spin button, or the UP or DOWN key,
to select spin speed “0”. Or select programme
Drain. Afterwards press Start/Pause: the water
will be drained and the programme ended.
• spin the laundry:
the default spin speed blinks - start the spin
and bleaching agents.
Chlorine or perborate bleaches must not be used!
Intensive Rinse
Helps to avoid detergent residues in the laundry
by extending the rinse phase.
Particularly suitable for washing baby laundry, for
people suering from allergies and for areas with soft
water.
Rapid
Enables quicker washing.
Recommendable for only lightly soiled laundry.
Not selectable for Cotton 95°C.
FUNCTIONS
Auto Dosing
Automatically dispenses liquid detergents
and fabric softener (if needed) from the
tanks of the detergent dispenser. To enable a
correct dosage, this function needs to be set
up as mentioned in section FIRST TIME USE/
Auto Dosing, and as described in detail in the
USE AND CARE GUIDE/AUTO DOSING – FIRST
USE.
Once you have completed the set-up, make sure that the
tanks are lled with detergent/fabric softener according
to the selected conguration:
• If you use fabric softener:
» Tank1: detergent
» Tank2: fabric softener
In this conguration, when setting up a programme,
Tank1 and Tank2 buttons light up to indicate that the
right amount of detergent and softener will be
dispensed, once the programme is started. If in certain
cases you do not want to dispense softener, simply
disable Tank 2 by pressing the corresponding button.
• If you do not use fabric softener:
» Tank1: main detergent
» Tank2: secondary detergent
In this conguration, when setting up a programme, you
can only select one tank. Make sure that the correct tank
is selected, according to the detergent you want to use
for the selected programme. The detergent will be
dispensed only from the tank for which the related
button lights up.
If occasionally you prefer to dose the detergent
manually (for instance because you want to use another
detergent), simply deactivate the tanks by pressing the
buttons, and add the detergent in the compartment for
manual dosing. The deactivation of the tanks will be
valid only for one programme. The Auto Dosing function
will automatically be active again for the next
programme which you set up.
When the supply of detergent/fabric softener in one of
the tanks runs low, the display shows a low level warning
when the washing machine is switched on, and also at
the end of the programme. In addition, the
corresponding tank button light blinks a few times.
When this message appears for the rst time, the supply
in the indicated tank is usually sucient for about two or
three more programmes.
When the supply of detergent/fabric softener in one of
the tanks has run out completely, the display shows an
empty tank warning and informs that only manual
dosing is possible. The button light of the empty tank
1
2
Related products and manuals for Washing machines Whirlpool FSCR 12440
(17 pages)
(16 pages)
(56 pages)
(84 pages)
(16 pages)
(8 pages)
(36 pages)Philips QC5125/15 manuály
Uživatelské manuály a uživatelské příručky pro Zastřihovače vlasů Philips QC5125/15.
Poskytujeme 1 manuály pdf Philips QC5125/15 ke stažení zdarma podle typů dokumentů: Datový list
Comments to this Manuals