EN
11
cycle by pressing Start/Pause. Or select a dierent spin
speed by pressing the Spin button and the UP or
DOWN key, and press Start/Pause.
Finish in
Enables to have the laundry ready at a particular
time by setting a delay until end of the
programme.
Choose a delay up to 23:30 hours. Only if you add
detergent manually: use powder - and not liquid -
detergent with this function to ll the detergent
compartment for manual dosing.
Select programme, temperature and options.
• Press the “Finish in” button – the button lights up.
• Press UP or DOWN key to select a delay up to 23:30
hours.
• Press “Start / Pause” - the countdown of the delay
starts. The display indicates the Finish in period (= time
until end of programme), as well as the default
programme duration.
• The programme starts automatically, in time to be
nished at the end of the delay period. On programme
start, the delay on the display is replaced by the
current programme status.
To cancel the delay
• either press Start/Pause to cancel the delay; to start
the selected programme immediately, press Start/
Pause again
• or press and hold On/O to cancel the complete
programme setting.
Key lock
To lock the buttons and keys of the control panel
against unwanted operation.
To lock:
• The washing machine must be switched on.
• Press and hold the option button until the
display indicates that the keys are locked. The
buttons and keys are locked now; only On/O
works.
If you switch the washing machine o and on again, the
key lock remains active until you unlock it.
To unlock: press and hold the option button again for at
least 3 seconds, until the display indicates that the keys
are unlocked.
INDICATORS
Door can be opened
Energy / Water monitor
Gives feedback about the energy and
water consumption of your programme
setting.
The less indicators light up, the more
economic is your programme setting. Can
still adapt after sensing phase of laundry load.
Failure: Observe the display message.
For any failures , refer to section Troubleshooting
in the “Use and Care Guide”.
Descaling
A display message will remind you regularly to descale
the washing machine. Find descaler appropriate for the
washing machine on www.whirlpool.eu.
To cancel the display reminder, press the OK key.
Connection status
If your washing machine has been already
connected to the Internet (see 6thSense Live
Remote Control / Setup Procedure section in the
Use and Care Guide) this indicator provides a feedback
about the status of the Internet connection through
your WiFi router.
When you switch on the washing machine, the
connection status indicator blinks: the washing machine
is looking for a connection. When it becomes solidly lit,
it means that the appliance is properly connected to the
Internet.
The strength of the wireless signal is shown by the
indicator (when all the elements of the indicator are lit,
the signal strength is strong).
(17 pages)
(16 pages)
(56 pages)
(84 pages)
(16 pages)
(8 pages)
(36 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals