Whirlpool WHES33 Specifications download pdf (Page 14)

Customizing Features / Options

(Model WHES20)

In the state of California: You must turn the Salt

Efficiency Fea ture ON. This may initiate more

frequent recharges. However, it will operate at

4,000 grains per pound of salt or higher.

SALT EFFICIENCY

When this feature is ON, the water softener will oper-

ate at salt efficiencies of 4000 grains of hardness per

pound of salt or higher (May recharge more often

using smaller salt dosage and less water). The sof-

tener is shipped with this feature set OFF.

1. Press and hold the PROGRAM button until one of

the screens in Figure 21 is displayed. Once in this

display, press the PROGRAM button once and one

of the two displays in Figure 22 is shown.

2. Press the r UP or s DOWN buttons to set ON or

OFF. When set to ON, the efficiency icon will be

displayed in the upper right hand corner of the

normal run display.

FIG. 23

FIG. 21

FIG. 22

Efficiency Icon

3. Press the PROGRAM button three times to return

to the normal run display (See Figure 23).

Displayed when efficiency

is set to “ON”

MAXIMUM DAYS BETWEEN REGENERA-

TIONS

The water softener automatically controls regenera-

tion frequency. This provides the greatest operating

efficiency and, under most conditions, this feature

should be left in this automatic mode. However, you

may modify this feature if you want to force a regen-

eration every set number of days. For example, if

your water supply contains clear water iron, you may

want the softener to regenerate every few days to

keep the resin bed clean. The maximum days

between recharges may be set from 1 to 15 days, as

follows:

NOTE: The softener will recharge on its own if need-

ed, even if it is before the set number of days.

1. Press and hold the PROGRAM button until the

screen in Figure 21 is displayed. Once in this dis-

play, press the PROGRAM button two times and

the display in Figure 24 is shown.

2. Press the r UP or s DOWN buttons to set the

number of days.

3. Press the PROGRAM button twice to return to the

normal time of day screen.

12 OR 24 HOUR CLOCK

At the default setting, all clock displays are shown in

12 hour time format (AM and PM). If 24 hour time

format is desired, follow the steps below:

1. Press and hold the PROGRAM button until the

screen in Figure 21 is displayed. Once in this dis-

play, press the PROGRAM button three times and

one of the two displays in Figure 25 is shown.

2. Press the

r UP or s DOWN buttons to set the

time format.

3. Press the PROGRAM button once again, to return

to the normal time of day screen.

FIG. 24

FIG. 25

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comments to this Manuals

No comments

Whirlpool WHES33 Specifications Page 14

Comments to this Manuals

Related products and manuals for Water dispensers Whirlpool WHES33