Whirlpool 9762997 Specifications download pdf (Page 9)

i_%iiC_ikii:::_i¸GI<:_I_j:_II_;CO_%_'%@<III;:Hoz!%

Typical rigid pipe connection

A combination of pipe fittings must be used to connect the range

to the existing gas line. Your connections may be different,

according to the supply line type, size and location.

1. Apply pipe-joint compound made for use with LP gas to all

pipe thread connections.

2. Using a pipe wrench to tighten, connect the gas supply to the

range.

/ H

A. Gas pressure regulator

B. 90 ° elbow (must have

Y2"male pipe thread)

C. Nipple

D. Union

E. Black iron pipe

F. Manual gas shutoff valve

G. Yp" or 3/4"gas pipe

H. Nipple

L Union

J. 90 ° elbow

Complete Connection

1. Check that the gas pressure regulator shutoff valve is in the

"on" position.

A. Gaspressure regulator shutoff valve

2. Open the manual shutoff valve in the gas supply line. The

valve is open when the handle is parallel to the gas pipe.

A. Closed valve

B. Open valve

3. Test all connections by brushing on an approved noncorrosive

leak-detection solution. If bubbles appear, a leak is indicated.

Correct any leak found.

4. Remove cooktop burner caps and grates from parts package.

Burner caps should be level when properly positioned. If

burner caps are not properly positioned, surface burners will

not light. Place burner grates over burners and caps.

Typical flexible connection

1. Apply pipe-joint compound made for use with LP gas to the

smaller thread ends of the flexible connector adapters (see B

and G in following illustration).

2. Attach one adapter to the gas pressure regulator and the other

adapter to the gas shutoff valve. Tighten both adapters.

3. Use a 1%6"combination wrench and channel lock pliers to

attach the flexible connector to the adapters. Check that

connector is not kinked.

A B C

H G F

A. Gas pressure regulator

B. Use pipe-joint compound

C. Adapter (must have Yp"male

pipe thread)

D. Flexible connector

E. Manual gas shutoff valve

F. F2" or 3/4"gas pipe

G. Use pipe-joint compound

H. Adapter

B .......................

A ...........

A. Burner base

B. Burner cap

C.Burner grate

Electrica_ Shock Hazard

Pmuginto a grounded 3 prong outlet.

Do not remove ground prong,

Do not use an adapter,

Do not use an extension cord.

Failure to follow these instructions can resumt in death,

fire, or electdcam shock.

5. Plug into a grounded 3 prong outlet,

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments

Whirlpool 9762997 Specifications Page 9

Comments to this Manuals

Related products and manuals for Cookers Whirlpool 9762997