Whirlpool 2188771 Use and Care Guide download pdf (Page 9)

The doors are difficult to open

Are the gaskets dirty or sticky? Clean gaskets with mild soap

and warm water.

The lights do not work

■ Is a light bulb loose in the socket or burned out? See

“Changing the Light Bulbs.”

■ Is the dispenser light set to ON? The dispenser light will

operate only when the levers are pressed. If you want the

dispenser light to stay on continuously, set the dispenser light

to ON, or NIGHT LIGHT or AUTO. See “Water and Ice

Dispensers.”

■ Is the dispenser light set to NIGHT LIGHT or AUTO? If the

dispenser is set to the NIGHT LIGHT or AUTO mode, be sure

the dispenser light sensor is not blocked. See “Water and Ice

Dispensers.”

Temperature and Moisture

Temperature is too warm

■ New installation? Allow 24 hours following installation for the

refrigerator to cool completely.

■ Door(s) opened often or left open? Allows warm air to enter

refrigerator. Minimize door openings and keep doors fully

closed.

■ Large load of food added? Allow several hours for

refrigerator to return to normal temperature.

■ Controls set correctly for the surrounding conditions?

Adjust the controls a setting colder. Check temperature in

24 hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture build-up is normal.

■ Humid room? Contributes to moisture build-up.

■ Door(s) opened often or left open? Allows humid air to enter

refrigerator. Minimize door openings and keep doors fully

closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■ Refrigerator connected to a water supply and the supply

shutoff valve turned on? Connect refrigerator to water

supply and turn water shutoff valve fully open.

■ Kink in the water source line? A kink in the line can reduce

water flow. Straighten the water source line.

■ Ice maker turned on? Make sure wire shutoff arm or switch

(depending on model) is in the ON position.

■ New installation? Wait 24 hours after ice maker installation

for ice production to begin. Wait 72 hours for full ice

production.

■ Large amount of ice recently removed? Allow 24 hours for

ice maker to produce more ice.

■ Ice cube jammed in the ice maker ejector arm?

Remove ice from the ejector arm with a plastic utensil.

■ Reverse osmosis water filtration system connected to

your cold water supply? This can decrease water pressure.

See “Water Supply Requirements” in either the Installation

Instruction booklet or the Use & Care Guide.

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■ Water shutoff valve not fully open? Turn the water shutoff

valve fully open.

■ Kink in the water source line? A kink in the line can reduce

water flow. Straighten the water source line.

■ Reverse osmosis water filtration system connected to

your cold water supply? This can decrease water pressure.

See “Water Supply Requirements.”

■ Questions remain regarding water pressure? Call a

licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■ New plumbing connections? New plumbing connections

can cause discolored or off-flavored ice.

■ Ice stored too long? Discard ice. Wash ice bin. Allow

24 hours for ice maker to make new ice.

■ Odor transfer from food? Use airtight, moisture proof

packaging to store food.

■ Are there minerals (such as sulfur) in the water? A water

filter may need to be installed to remove the minerals.

■ Is there a water filter installed on the refrigerator? Gray or

dark discoloration in ice indicates that the water filtration

system needs additional flushing.

The ice dispenser will not operate properly

■ Freezer door closed completely? Close the door firmly. If it

does not close completely, see “The doors will not close

completely.”

■ Ice bin installed correctly? Be sure the ice bin is firmly in

position.

■ New installation? Wait 24 hours after ice maker installation

for ice production to begin. Wait 72 hours for full ice

production.

■ Ice stuck in the delivery chute? Use a plastic utensil to clear

the delivery chute.

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comments to this Manuals

No comments

Modely	Typ Dokumentu
QC5050/00	Datový list Philips Hair Clipper QC5050, 2 stránky
NT9110/60	Datový list Philips Nose, ear & eyebrow trimmer, Series 3000 NT9110/60, 2 stránky
QG3193/00	Datový list Philips Grooming kit QG3193, 2 stránky
QC5015/10	Datový list Philips QC5015, 2 stránky
QC5005/30	Datový list Philips Hair clipper QC5005, 2 stránky
QC5055/00	Datový list Philips Hair clipper QC5055/00, 2 stránky
QG3060/60	Datový list Philips QG3060 6 in 1 Grooming kit Grooming kit, 2 stránky
QC5099	Datový list Philips QC5099/00 Hair Clipper, 2 stránky
QC5005/00	Datový list Philips QC5005 Hair Clipper, 2 stránky
QC5055/40	Datový list Philips Hair clipper QC5055/40, 2 stránky
QC5045/00	Datový list Philips Hair clipper QC5045, 2 stránky
0QC5770/80	Datový list Philips QC 5770/80, 2 stránky
QC5070/80	Datový list Philips Hair clipper QC5070/80, 2 stránky
QC5115/15	Datový list Philips Hair clipper QC5115, 2 stránky
HC9490	Uživatelský manuál Philips HC9490 [no] , 9 stránky
QC5380/80	Datový list Philips hair clipper QC5380, 2 stránky
HC7450/80	Uživatelský manuál Philips HC7450/80 Panduan pengguna, 90 stránky
QC5570/32	Uživatelský manuál Philips QC5570/15 Benutzerhandbuch, 150 stránky
QC5010/00	Datový list Philips Hair clipper QC 5010, 2 stránky
QC5055/40	Uživatelský manuál Philips QC5055/40 User manual, 10 stránky

Whirlpool 2188771 Use and Care Guide Page 9

Comments to this Manuals

Philips QC5125/15 manuály

Philips QC5125/15 Datový list (2 strany)

Tabulka s obsahem

Další produkty a příručky pro Zastřihovače vlasů Philips

Whirlpool 2188771 Use and Care Guide Page 9

Comments to this Manuals

Related products and manuals for Fridges Whirlpool 2188771

Philips QC5125/15 manuály

Philips QC5125/15 Datový list (2 strany)

Tabulka s obsahem

Další produkty a příručky pro Zastřihovače vlasů Philips