Whirlpool ARC 103 AP Instruction for Use Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 11
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
17
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
The appliance must be handled and installed
by two or more persons.
Be careful not to damage the floors when you
move the appliance (e.g. parquet flooring).
During installation, make sure the appliance
does not damage the power cable.
Check the appliance is not positioned near a
heat source.
To guarantee adequate ventilation, leave a
space on both sides and above the appliance
and follow the installation instructions.
Keep the appliance vent outlets free.
Do not damage the appliance refrigerant
circuit pipes.
Install and level the appliance on a floor strong
enough to take its weight and in a place
suitable for its size and use.
Install the appliance in a dry and well
ventilated area. The appliance is intended for
operation in environments where ambient
temperatures fall within the following ranges,
depending on the climatic class indicated on
the data plate. The appliance may not work
properly if it is left for a long time at a
temperature outside the specified range.
Ensure that the voltage indicated on the
appliance data plate corresponds to the
domestic supply voltage.
Do not use single/multiple adapters or
extension cables.
For the water connection, use the pipe
supplied with the new appliance; do not reuse
the one from the previous appliance.
Power cable modification or replacement
must only be carried out by qualified
personnel.
Electrical disconnection must be possible
either by unplugging the appliance or by
means of a double-pole switch located upline
from the socket.
SAFETY
Do not store or use petrol, flammable liquids
or gas in the vicinity of this or other electrical
appliances. The fumes can create a fire hazard
or explosion.
Do not use mechanical, electric or chemical
means other than those recommended by the
Manufacturer to speed up the defrost
process.
Do not use or place electrical appliances
inside the product if they are not of the type
expressly authorised by the Manufacturer.
The appliance is not intended for use by
persons (children included) with restricted
physical, sensory or mental abilities or
without experience and knowledge of the
appliance, unless they are under the
supervision or instruction of a person
responsible for their safety. Do not allow
children to play or hide inside the appliance -
risk of becoming trapped and suffocating.
Do not swallow the contents (non-toxic) of the
ice packs (in some models).
Do not eat ice cubes or ice lollies immediately
after taking them out of the freezer since they
may cause cold burns.
USE
Before carrying out any maintenance or
cleaning, always unplug the appliance or
disconnect the power supply.
All appliances equipped with ice-makers and
water dispensers must be connected to a
water supply that only delivers potable water
(with mains water pressure of between 0.17
and 0.81 MPa (1.7 and 8.1 bar)). Ice makers
and/or water dispensers not directly
connected to the water mains must be filled
using potable water only.
Use the refrigerator compartment to store
fresh food only and the freezer compartment
to store frozen food, to freeze fresh food, and
to make ice cubes only.
Do not store glass containers with liquids in
the freezer since they may burst.
The Manufacturer declines any liability if
the above advice and precautions are not
respected
Climatic Class Amb. temp.
(°C)
Amb. temp.
(°F)
SN From 10 to 32 From 50 to 90
N From 16 to 32 From 61 to 90
ST From 16 to 38 From 61 to 100
T From 16 to 43 From 61 to 110
17
ELECTRICAL WARNINGS
It must be possible to disconnect
the appliance from the power supply by
unplugging it if plug is accessible, or by
a multi-pole switch installed upstream
of the socket in accordance with the
wiring rules and the appliance must be
earthed in conformity with national
electrical safety standards.
Do not use extension leads,
multiple sockets or adapters. The
electrical components must not be
accessible to the user after installation.
Do not use the appliance when you are
wet or barefoot. Do not operate this
appliance if it has a damaged power
cable or plug, if it is not working
properly, or if it has been damaged or
dropped.
SIf the supply cord is damaged, it
must be replaced with an identical one
by the manufacturer, its service agent
or similarly qualified persons in order
to avoid a hazard - risk of electric
shock.
CLEANING AND MAINTENANCE
WARNING: Ensure that the
appliance is switched off and
disconnected from the power supply
before performing any maintenance
operation; never use steam cleaning
equipment - risk of electric shock.
Do not use abrasive or harsh
cleaners such as window sprays,
scouring cleansers, flammable fluids,
cleaning waxes, concentrated
detergents, bleaches or cleansers
contain
ing petroleum products on
plastic parts, interior and door liners or
gaskets. Do not use paper towels,
scouring pads, or other harsh cleaning
tools.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and
is marked with the recycle symbol .
The various parts of the packaging must
therefore be disposed of responsibly and in full
compliance with local authority regulations
governing waste
disposal.
DISPOSAL OF HOUSEHOLD
APPLIANCES
This appliance is manufactured with recyclable
or reusable materials. Dispose of it in
accordance with local waste disposal regulations.
For further information on the treatment,
recovery and recycling of household electrical
appliances, contact your local authority, the
collection service for household waste or the
store where you purchased the appliance. This
app
liance is
marked in compliance with European Directive
2012/19/EU, Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product is
disposed of correctly, you will help prevent
negative consequences for the environment and
human health.
The symbol on the product or on the
accompanying documentation indicates that it
should not be treated as domestic waste but
must be taken to an appropriate col
lection
center for the recycling of electrical and
electronic equipment.
ENERGY SAVING TIPS
To guarantee adequate ventilation follow
installation instructions. Insufficient ventilation at
the back of the product increases energy
consumption and decreases cooling efficiency.
Frequent door opening might cause an increase
in Energy Consumption. The internal
temperature of the appliance and the Energy
Consumptio
n may be affected also by the
ambient temperature, as well as location of the
appliance. Temperature setting should take into
consideration these factors. Reduce door
opening to a minimum. When thawing frozen
food, place in the refrigerator. The low
temperature of the frozen products cools the
food in the refrigerator. Allow warm food and
drinks to cool down before placing in the
appliance. Positioning of
the shelves in the
refrigerator has no impact on the efficient usage
of energy. Food should be placed on the shelves
in such way to ensure proper air circulation
(food should not touch each other and distance
between food and rear wall should be kept).
You can increase storage capacity of frozen food
by removing baskets and, if present, Stop Frost
shelf. Do not worry about noises coming from
the compressor
which are described as normal
noises in this product’s Quick Guide.
Page view 2
1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments