Whirlpool W10417000B Use and Care Guide download pdf (Page 30)

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.whirlpool.com In Canada, www.whirlpool.ca

Operation

PROBLEM POSSIBLE CAUSES SOLUTIONS

The refrigerator will not

operate

Check electrical supply Plug the power cord into a grounded 3 prong outlet.

Do not use an extension cord.

Make sure there is power to the outlet. Plug in a lamp to see

if the outlet is working.

Reset a tripped circuit breaker. Replace any blown fuses.

NOTE: If problems continue, contact an electrician.

Check controls Make sure the controls are turned on. See “Using the

Control(s).”

New installation Allow 24 hours following installation for the refrigerator to

cool completely.

NOTE: Adjusting the temperature controls to the coldest

setting will not cool either compartment more quickly.

Refrigerator Control is in Showroom

mode (on some models)

If the refrigerator is in Showroom mode, cooling is turned off

and “Showroom” will be illuminated on the control panel. See

“Using the Control(s)” for more information.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 123 124

No comments

Whirlpool W10417000B Use and Care Guide Page 30