Whirlpool WRS970CIDE Use and Care Guide download pdf (Page 13)

To view and adjust the set points, press and hold the TEMP

button for 3 seconds. When adjust mode is activated, adjusting

information will appear on the display screen.

NOTE: To view Celsius temperatures, press the LIGHT button

when adjust mode is activated. To return the display setting to

Fahrenheit, press LIGHT again.

■ When adjust mode is activated, the display screen shows the

refrigerator set point and “FRIDGE” appears.

■ Press LOCK to raise the set point, or press OPTIONS to lower

the set point.

■ When you have finished viewing (and adjusting if desired) the

refrigerator set point, press TEMP to change the display to

show the freezer set point. When the zone has been changed,

“FREEZER” appears on the display screen.

■ Press LOCK to raise the set point, or press OPTIONS to lower

the set point.

■ When you have finished viewing (and adjusting if desired) both

the refrigerator and freezer set points, press MEASURED FILL

to save the settings.

NOTE: To exit without saving changes, press ICE TYPE at any

time while in adjust mode, or allow about 60 seconds of

inactivity and adjust mode will turn off automatically.

When adjusting temperature set points, use the following chart as

a guide.

The set point range for the refrigerator is 33°F to 45°F (0°C to

7°C). The set point range for the freezer is -5°F to 5°F (-21°C to

-15°C).

Cooling On/Off

Your refrigerator and freezer will not cool when cooling is

turned off.

■ To turn cooling off, press and hold the LOCK and MEASURED

FILL buttons at the same time for 3 seconds.

IMPORTANT: To avoid unintentionally locking the dispenser

or changing other settings, be sure to press both buttons at

exactly the same time.

When cooling is off, “COOLING OFF” will appear on the

display screen.

■ Press and hold LOCK and MEASURED FILL for 3 seconds

again to turn cooling back on.

Additional Features

Fast Ice

The Fast Ice feature assists with temporary periods of heavy ice

use by increasing ice production over a 24-hour period.

IMPORTANT: This feature only works if the ice maker is turned

on. See “Ice Maker and Storage Bin.”

■ To turn on the feature, press OPTIONS then TEMP. When the

feature is on, the Fast Ice icon will appear on the dispenser

display screen. The Fast Ice setting will remain on for 24 hours

unless manually turned off.

■ To manually turn off the feature, press OPTIONS then TEMP

again, or adjust the freezer temperature set point. The Fast Ice

icon will disappear when the feature is off.

NOTE: If increased ice production is desired at all times, change

the freezer set point to a lower setting. Setting the freezer to a

colder temperature may make some foods, such as ice cream,

harder.

6th Sense

Temperature Management (on some models)

The 6th Sense

feature assists with regulating the temperature

inside the refrigerator. If a large quantity of warm food is placed in

the refrigerator or warm air enters the refrigerator while the door is

held open, the 6th Sense

system activates to quickly restore the

temperature to the set point.

NOTE: The 6th Sense

system is always on when your refrigerator

is operating. You do not need to press any buttons to activate it.

The 6th Sense

icon on the dispenser display screen indicates

that the feature is functioning properly.

Door Ajar Alarm

The Door Ajar Alarm feature sounds an alarm when the refrigerator

or freezer door is open for 5 minutes and the product cooling is

turned on. The alarm will repeat every 2 minutes. Close both

doors to turn it off. The feature then resets and will reactivate

when either door is left open again for 5 minutes.

NOTE: To mute the audible alarm while keeping the doors open,

such as while cleaning the inside of the refrigerator, press any

button on the control panel. The alarm sound will be temporarily

turned off, but the Door Ajar icon will still be displayed on the

dispenser control panel.

Disabling Sounds

■ To turn off all control and dispenser sounds, press the

OPTIONS button to enter Options mode, then press OPTIONS

again.

■ To turn all sounds back on, press the OPTIONS button to

enter Options mode (unless you are already in Options mode),

then press OPTIONS again.

Dual Evaporator (on some models)

Some models come equipped with a dual sequential evaporation

system, which includes two separate evaporators for the

refrigerator and freezer compartments.

Dual evaporation results in higher humidity, which helps keep

foods in the refrigerator from spoiling as quickly and improves

food quality and freshness in the freezer due to decreased freezer

burn. In addition, the dual evaporation system helps keep food

smells in the refrigerator from transferring to ice in the freezer.

NOTE: The dual evaporation system is always activated when

your refrigerator is operating. You do not need to press any

buttons to turn it on.

CONDITION: TEMPERATURE

ADJUSTMENT:

REFRIGERATOR too cold REFRIGERATOR Setting

1° higher

REFRIGERATOR too warm REFRIGERATOR Setting

1° lower

FREEZER too cold FREEZER Setting

1° higher

FREEZER too warm /

Too little ice

FREEZER Setting

1° lower

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 87 88

Comments to this Manuals

No comments

Whirlpool WRS970CIDE Use and Care Guide Page 13

Comments to this Manuals

Related products and manuals for Fridges Whirlpool WRS970CIDE