Whirlpool AMD 010 Installation Manual download pdf (Page 11)

Timer function

It is convenient to set the timer on by pressing the

button to achieve a comfortable room temperature

at the time you get home.

You can also set timer off automatically to enjoy a

good sleep at night.

Timer-setting

Set the timer when the appliance is off.

Switch-off timer during operation.

A - As time goes by, LCD on remote control only

displays the remaining time not the set

temperature.

B - The previous set time is stored and the next

set time begins with the previous setting.

C - On- timer and Off-timer cannot be set at the

same time.

D - The room may not reach your desired

temperature within the preset time this

depends on the size of the room.

Example: setting the next operation after 9.5

hours

1. Set desired operating mode, temperature and

indoor fan speed, then press the TIMER button;

"h" flashes on display.

2. Point the remote control at the signal receptor

of the indoor unit, press the or button

when "h" flashes. Choose the time you desire,

then press the TIMER button, a "beep" can be

heard.

A - Timer indicator on the indoor unit lights up.

B - "h" stops flashing.

Press the TIMER button, "h" flashes on the

display, then you can set the time.

Each time the or button is pressed,

If the desired time is within 10 hours, the set

time increases or decreases by 0.5 hour;

If desired time is beyond 10 hours, increases or

decreases by 1 hour.

The range can be set is 0.5 hour to 24 hours.

3. To cancel the set timer: press the TIMER button

again, a "beep" can be heard and the timer

indicator on the indoor unit lights off.

Downloaded from AC-Manual.com Manuals

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

No comments

Whirlpool AMD 010 Installation Manual Page 11