Whirlpool KRFC 9035 Instruction for Use download pdf (Page 7)

The controls are located at the top front of the refrigerator compartment.

Control

Initial Control Settings

After plugging the refrigerator in, set the controls.

• Pressing the or pads adjusts the controls to the desired setting.

• The temperature control range for both compartments is 1 through 7 (coldest).

• Set the Freezer control on 4.

• Set the Refrigerator control on 4.

• Let the refrigerator run at least 8 to 12 hours before adding food.

Warm Cabinet Surfaces

At times, the front of the refrigerator cabinet may be warm to the touch. This is a normal occurrence that

helps prevent moisture from condensing on the cabinet. This condition will be more noticeable when you

first start the refrigerator, during hot weather and after excessive or lengthy door openings.

Adjusting the Controls

• 24 hours after adding food, you may decide that one or both compartments should be colder or

warmer. If so, adjust the control(s) as indicated in the Temperature Control Guide table below.

• Except when starting the refrigerator, do not change either control more than one number at a time.

• Allow 24 hours for temperatures to stabilize.

Temperature Control Guide

Touch Temperature Controls (select models)

Refrigerator too warm Set the Refrigerator control to next higher number by

pressing the pad.

Refrigerator too cold Set the Refrigerator control to next lower number by

pressing the pad.

Freezer too warm Set the Freezer control to next higher number by pressing

the pad.

Freezer too cold Set the Freezer control to next lower number by pressing

the pad.

Turn control OFF Press the Refrigerator or freezer pad until a dash (—)

appears in the display.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

No comments

Whirlpool KRFC 9035 Instruction for Use Page 7