Whirlpool 1188176 Specifications download pdf (Page 6)

"' E

L ................................................. F

A. _6" machine screws D. Nut

B. Support plate E.Support angle

C. Flat washer F. Levering bolt and Iocknut

Place support platform against lower window track and firmly

against vertical edge of window frame.

Attach support platform to windowsill using two 1" wood

screws.

If required, overcome interference of support platform with

window track or storm windows by securely attaching a shim

strip to the windowsill. Shim strip should be as long as width

of support platform and flush with back edge of sill.

Thickness of shim strip should be controlled by amount of

interference.

A ................................................................................

A. 1" wood screws D. Windowsill

B. Support plate E. Shim strip

C. Lower window track

Pull support angle against outside of structure. Tighten two

7A6"machine screws on top of support platform.

Adjust leveling bolt to level support angle. Tighten leveling

bolt Iocknut.

NOTE: Air conditioner must be level or tilted back slightly to

facilitate proper condensate disposal.

Cut two pieces of seal to height of window opening. Remove

backing and apply to window frame and sliding sash that will

rest against air conditioner cabinet.

Install air conditioner in window

Slide air conditioner onto support platform. Check to be sure

air conditioner side channel fits securely against vertical edge

of window frame.

NOTE: If air conditioner side channel does not fit securely

against window frame, remove air conditioner and readjust

leveling bolt.

Drill two 1/8"holes through the window channel frame in

alignment with existing holes in bottom bracket. Install two

%" self-tapping screws through these holes.

NOTE: If window channel frame is not tall enough to use

existing holes, drill two new holes off to the side of the

existing holes to attach the air conditioner bottom bracket to

the support platform. Air conditioner should be firmly

anchored to window channel frame or support platform.

A .........................................

III .......

A. Window channel frame

B. %" self-tapping screw

_..................B

............... C

I¸¸¸¸............................. O

C. Bottom bracket

D. _" drilled hole

3. Slide inside window sash closed. Check to be sure vertical

edge of inside window sash is pressed firmly against side of

air conditioner cabinet. Cut remaining seal to width of

window opening. Remove backing and apply to top inside

edge of window frame.

4. Install speed clips on top and bottom inside edge of window

to provide locking.

5. Using supplied plastic seal, cut to proper length, insert

between inside window sash and outside window.

A. Speed clip

B. Window channel

C. Plastic seal

6. See "Complete Installation."

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

Comments to this Manuals

No comments

Whirlpool 1188176 Specifications Page 6

Comments to this Manuals

Related products and manuals for Split-system air conditioners Whirlpool 1188176