Whirlpool 1188176 Specifications Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
2.
Install air conditioner in window
1. Slide air conditioner onto support platform. Check to be sure
air conditioner side channel fits securely against vertical edge
of window frame.
NOTE: If air conditioner side channel does not fit securely
against window frame, remove air conditioner and readjust
leveling bolt.
2. Drill two 1/8"holes through the window channel frame in
alignment with existing holes in bottom bar. Install two %"
self-tapping screws through these holes.
NOTE: If window channel frame is not tall enough to use
existing holes, drill two new holes off to the side of the
existing holes to attach the air conditioner bottom bar to the
support platform. Air conditioner should be firmly anchored to
window channel frame or support platform.
J
A. Window channel frame
B. _" self-tapping screw
_ .........................S
\
.......... C
C.Bottom bracket
D. _" drilled holes
Place top retainer on top edge of filler panel, then place the
bottom edge of filler panel into groove of bottom retainer
(mounted on air conditioner). Filler panel may be trimmed
with knife or scissors to fit window height. Slide sliders
upward making sure filler panel aligns in sliders.
A
B
With sliders up against top retainer, drill 1/8"hole through
window frame in alignment with existing hole in slider. Install
%" self-tapping screw in hole. Repeat for other slider.
3.
A. _" drilled hole
B. _" self-tapping screw
Check all seals and plug all air leaks around air conditioner.
Use sealant to fill any minor openings.
EJectricaJ Shock Hazard
Ptug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can resutt in
death, fire, or etectricaJ shock.
4. Plug into a grounded 3 prong outlet.
5. Press RESET on the power supply cord plug.
A. Top retainer
B. Seal under top
retainer
C. Filler board
D. Slider
E.Seal between side of cabinet and sliding
sash (sliding window installation only)
F. Side channel
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Comments to this Manuals

No comments