Whirlpool AWSE 7200 Instruction for Use Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 25
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
GB 5
DESCRIPTION OF THE WASHING MACHINE
OPENING/CLOSING DOOR
CHILD SAFETY (IF AVAILABLE)
BEFORE THE FIRST WASH CYCLE
1.) Worktop
3.) Detergent dispenser
5.) Child safety device (if provided, inside the door)
7.) Adjustable feet
2.) Control Panel
4.) Door
6.) Plinth covering pump access
The layout of control panel depends on the model
Only when the door lock light goes off in the display window, the door can be opened.
Never open the door forcibly during operation, otherwise you would damage the door lock.
If you must open the door during operation, first, turn off the power or press Reset for at least 3 seconds,
then must wait at least 2 minutes to let the door lock released.
To open the door, hold the door handle and pull the door. Close the door by pressing it without
excessive force until it clicks shut.
To protect the appliance against improper use, turn the
plastic screw on the interior of the door. To do this, use a
coin or similar objects.
Slot vertical: the door will not lock.
Slot horizontal-normal position: the door can be locked
again.
To remove any residues from manufacturing, we recommend that you carry out a short wash cycle
without laundry.
1. Open the tap.
2. Close the door.
3. Add a small amount of detergent (maximum 1/3 of quantity the detergent manufacturer recommends
for lightly soiled laundry) to main wash chamber of the detergent dispenser.
4. Select and start programme “Synthetics” at 60°C (see separate programme chart).
IFU Ares W10426884A GB.fm Page 5 Wednesday, August 10, 2011 11:09 AM
Black process 45,0° 130,0 LPI
16-Sep-2011 03:29:02 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 24 25

Comments to this Manuals

No comments