Whirlpool AWZ 410 Instruction for Use download pdf (Page 12)

Home

Appliances

INSTALLATION

Removing the transit bolts

1.Slacken and remove the screws “A” which lock the drum

during transport by following the instructions given at

the side.

2.Insert a screwdriver into the empty holes and tilt to

remove the plastic spacers “C” (transit bolts) and retrieve

them.

3.Keep the transit bolts for future use.

If the spacers remain inside the machine: open the rear

panel by removing the screws “B” remove the spacers and

replace the panel.

Fit the transit bolts before transporting the appliance as

follows:

1.Disconnect the plug, remove the inlet and drain hoses.

2.Uscrew fixing screws “B” on the rear panel and remove it.

3.Insert the four screws “A” of the safety catch in the four

rubber bushes, then put the four spacers “C” on the

screws behind the panel.

4.Position the rear panel on the appliance, first tighten the

four screws “A” of the safety catch for transportation to

the rear part of the tub, then use screws “B” to fit the

panel to the appliance.

3Gb20105.fm5 Page 13 Thursday, February 28, 2002 4:33 PM

1 2 ... 7 8 9 10 11 12 13

No comments

Whirlpool AWZ 410 Instruction for Use Page 12