Whirlpool AWZ 410 Instruction for Use download pdf (Page 7)

WASHING PROGRAMME

Selecting the programme:

1.Check that the programme selector is on “Stop”.

2.Plug in the appliance.

3.Open the water tap.

4.Set the programme selector to the desired programme.

5.Depending on the model, set the thermostat knob to the desired temperature.

6.Depending on the model, set the spin speed selector to the desired spin speed.

7.Select the options desired by pressing the corresponding buttons.

By a further press of the button this option can be turned off again.

8.Check that the door is well closed. Press the

“On/Off”

button.

The indicator lamp lights up.

Attention: the programme selector knob only moves clockwise, do not force it in the opposite

direction.

Door lock

The door locks automatically after the programme start until the end of the programme.

If the programme selector is moved to the “Stop” position or if the electricity supply is interrupted, the

door is released after approximately two minutes.

In this case do not open the door because hot water could come out of the door.

Programme end

The programme selector knob is at the “Stop” position.

1.Press the “On/Off” button. The indicator light turns off .

2.Cancel the special options by pressing the appropriate buttons.

3.Turn off the tap.

4.Wait approximately 2 minutes for the door to unlock.

5.Open the door and unload the machine.

N.B. After unloading, do not fully close the door but leave it ajar to allow the drum to dry.

Changing programme

1.Press the “On/Off” button. The indicator light turns off .

2.Select the new programme.

3.Press the “On/Off” button. The new programme will re-start.

Do not add detergent for this programme.

Programme interruption or pause

To interrupt the running programme for a certain period of time and continue it at a later time:

1.Press the “On/Off” button.

2.Following the desired pause press the “On/Off” button again.

3Gb20105.fm5 Page 8 Thursday, February 28, 2002 4:33 PM

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Whirlpool AWZ 410 Instruction for Use Page 7