Whirlpool CHW9150GW Installation Guide download pdf (Page 8)

4. Turn on the water faucets completely and check for leaks

at water faucets and washer connections.

NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement

dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts,

wear, or leaks are found.

Connect the Drain Hose

Remove drain hose from washer drum

1. Using locking pliers, squeeze hose clamp tabs together

and insert over the end of drain hose.

2. Slide drain hose onto washer connection.

3. Once drain hose is in place, release pliers.

Washer drain system can be installed using a ﬂoor drain,

wall standpipe, ﬂoor standpipe, or laundry tub.

Laundry tub drain or standpipe drain

Connect the drain hose form to the corrugated drain hose.

To keep drain water from going back into the washer:

■ Use the drain hose form and do not force excess drain hose

into standpipe. Hose should be secure but loose enough

to provide a gap for air.

■ Do not lay excess hose on the bottom of the laundry tub.

Floor drain

You may need additional parts. See “Floor drain” under

“Tools and Parts.”

Secure the Drain Hose

Drain hose must be secured to stop the hose from moving when

water is pumped out. If the drain hose moves, water may end up

on the ﬂoor.

1. Drape the power cord over the washer top.

2. Move the washer to its ﬁnal location.

3. Place the drain hose in the laundry tub or standpipe as shown.

See illustrations A and B.

A B C

NOTES:

■ Do not force excess drain hose back into the rear of

the washer.

■ To avoid siphoning, do not seal or put more than 4½"

(114 mm) of the drain hose into drainpipe or standpipe.

■ If the washer faucets and the drain standpipe are recessed,

put the hooked end of the drain hose in the standpipe as

shown. See illustration C.

■ It is the responsibility of the installer to install and secure the

drain hose into the provided plumbing/drain in a manner that

will avoid the drain hose coming out of, or leaking from, the

plumbing/drain.

/2"

(114 mm)

/2"

(114 mm)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments

Whirlpool CHW9150GW Installation Guide Page 8

Comments to this Manuals

Related products and manuals for Washing machines Whirlpool CHW9150GW