Whirlpool ADGI 941 FD Instruction for Use download pdf (Page 4)

Before using your dishwasher for the first time:

A. Set the water softener

B. Add 1.5Kg dishwasher salt and then full fill the salt container with water

C. Fill the rinse aid dispenser

D. Fill in detergent

A. Water Softener

The water softener must be set manually, using the water hardness dial. The water softener is designed to

remove minerals and salts from the water, which would have a detrimental or adverse effect on the

operation of the appliance. The higher the content of these minerals and salts, the harder your water is.

The softener should be adjusted according to the hardness of the water in your area. Your local Water

Authority can advise you on the hardness of the water in your area.

Adjusting Salt Consumption

The dishwasher is designed to allow for adjustment in the amount of salt consumed based on the hardness

of the water used. This is intended to optimise and customise the level o f salt consumption.

Please follow the steps below for adjustment in salt consumption.

1. Open the door ,Switch on the appliance;

2. Press the Program button for more than 5 seconds to start the water softener set model within

60seconds after the appliance was switched on( The Salt and Rinse aid warning lights will be on

periodically when it get in the set model );

3. Press the Program button to select the proper set according to your local environment, the sets will

change in the following sequence: H1->H2->H3->H4->H5->H6;

4. Press the Power button to end the set up model.

Note 1

1 dH=1.25 Clarke=1.78 fH=0.178mmol/l

DH = German degree

fH = French degree

Clarke = British degree

Note 2

The manufactory setting: H4 (EN 50242)

Contact your local water board for information on the hardness of your water supply.

Note: If your model does not have any water softener, you may skip this section.

Water softener

The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will

form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt container

specifically designed to eliminate lime and minerals from the water.

PRIOR USING FOR THE FIRST TIME

WATER HARDNESS

Selector

position

Salt

consumption

(gram/cycle)

°dH °fH °Clarke mmol/l

0~5 0~9 0~6 0~0.94 H1 0

6~11 10~20 7~14 1.0~2.0 H2 9

12~17 21~30 15~21 2.1~3.0 H3 12

18~22 31~40 22~28 3.1~4.0 H4 20

23~34 41~60 29~42 4.1~6.0 H5 30

35~55 61~98 43~69 6.1~9.8 H6 60

1 2 3 4 5 ... 31

Comments to this Manuals

No comments

Whirlpool ADGI 941 FD Instruction for Use Page 4

Comments to this Manuals

Related products and manuals for Dishwashers Whirlpool ADGI 941 FD