EN
11
Delayed start
It is possible to delay the start time of the wash cycle by 3,
6 or 9 hours:
1:After selecting thedesired wash cycleand any other
options,press the DELAYEDSTART button: the indicator
light will go on.
2:SelectthedesireddelaytimebypressingtheDelayedStart
button repeatedly. The indicator lights for the wash phase
(3hours),dryingphase(6hours)andendphase(9hours)
will switch on in succession.
If the Delayed Start button is pressed again, the option is
deselected and the indicator light switches off.
3. After the selection process, the countdown will begin if
theStart/Pausebuttonispressed.Theselecteddelay-period
indicatorlight flashes andthe Start/Pause buttonstops
flashing (fixed light.)
4.Oncethistimehaselapsed,theDELAYEDSTARTindicator
light switches off and the wash cycle begins.
The Delayed Start function cannot be set once the wash
has been started.
Wash options
The OPTIONS may only be set, changed or reset after
the wash cycle has been selected and before the Start/
Pause button has been pressed.
Only the options whic are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected wash cycle
(see Table of wash cycles)
, the
corresponding symbol flashes rapidly 3 times.
If an option is selected which is not compatible with another
(previously selected) option, it will flash 3 times and switch
off, while the most recently selected option will remain active.
To deselect an option which has been set by mistake, press
the corresponding button again.
Special wash cycles and Options
Half load
If there are not many dishes to be washed, a half load cycle
may be used in order to save water, electricity and detergent.
Select the wash cycle and press the HALF LOAD button; the
indicator light will go on.
Press the HALF LOAD button again to deselect this option.
Remember to halve the amount of detergent.
It is better to use powder detergent.
Notes:
Optimumperformancelevelswhenusingthe“Fast"and"Express
40’”cyclescanbeachievedbyrespectingthespecifiednumber
of place settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Note for Test Laboratories: forinformationoncomparativeEN
testing conditions, please send an email to the following address:
Comments to this Manuals