Whirlpool LSB 7B116 X EU Instruction for Use download pdf (Page 5)

Electrical connection

Before inserting the plug into the electrical socket, make

sure that:

• Thesocket is earthedand complies with current

regulations.

• The socket canwithstand the maximum load ofthe

appliance, which is indicated on the data plate located

on the inside of the door

(see chapter entitled Description

of the appliance).

• Thepowersupplyvoltagefallswithinthevaluesindicated

on the data plate on the inside of the door.

• Thesocketiscompatiblewiththeplugoftheappliance.

If this is not the case, ask an authorised technician to

replace the plug

(see Assistance)

; do not use extension

cables or multiple sockets.

Once the appliance has been installed, the power supply

cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be re-

placed by the manufacturer or its Technical Assistance

Serviceinordertopreventallpotentialhazards.(SeeAs-

sistance)

The Company shall not be held responsible for any

incidents that occur if these regulations are not observed.

to protect it from any condensation which may form.

Technical data

Dimensions

width 59,5 cm

height 82 cm

depth 57 cm

Capacity 13 standard place-settings

Water supply

pressure

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

7,25 – 145 psi

Power supply

voltage

See appliance data plate

Total absorbed

power

See appliance data plate

Fuse See appliance data plate

This dishwasher conforms to the

following European Community

Directives:

-2006/95/EC (Low Voltage)

-2004/108/EC (Electromagnetic

Compatibility)

-2009/125/EC (Comm. Reg.

1016/2010) (Ecodesign)

-97/17/EC (Labelling)

-2012/19/EU Waste Electrical

and Electronic Equipment

(WEEE)

Assistance

Before contacting Assistance:

• Checkwhethertheproblemcanberesolvedusingthe

Troubleshooting guide

(see Troubleshooting).

• Restarttheprogrammetocheckwhethertheproblemhas

ceased to exist.

• Iftheproblempersists,contacttheAuthorisedTechnical

Assistance Service.

Never use the services of unauthorised technicians.

Please have the following information to hand:

• Thetypeofmalfunction.

• Theappliancemodel(Mod.).

• Theserialnumber(S/N).

This information can be found on the appliance data plate

(see Description of the appliance)

The machine has a buzzer/set of tones

(depending on the

dishwasher model

) to inform the user that a command has

been implemented: power on, cycle end etc.

The symbols/indicator lights/LEDs on the control panel/

display may vary in colour and may have a flashing or fixed

light

(depending on the dishwasher model)

The display provides useful information concerning the type

of wash cycle, drying/wash-cycle phase, remaining time,

temperature etc etc.

Anti-condensation strip*

After installing the dishwasher, open the door and stick the

adhesive transparent strip under the wooden shelf in order

to protect it from any condensation which may form.

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and

the retaining elastic elements from the upper rack, if any.

Immediately before the first washing, completely fill the salt

dispenser with waterand add onlythen approximately 1

kgofsalt(seechapterentitledRinseaidandrefinedsalt).

The water may overflow: this is normal and is not a cause

for concern. Select the water hardness value (see chapter

entitledRinseaidandrefinedsalt).-Afterthesalthasbeen

pouredinto the machine,theLOW SALT indicatorlight*

switches off.

If the salt container is not filled, the water softener and

the heating element may be damaged as a result.

1 2 3 4 5 6 ... 28

Comments to this Manuals

No comments

Whirlpool LSB 7B116 X EU Instruction for Use Page 5

Comments to this Manuals

Related products and manuals for Dishwashers Whirlpool LSB 7B116 X EU