Whirlpool 9700S User Manual download pdf (Page 47)

4-18

REMOVING THE BURNER ASSEMBLY,

FLAME SENSOR, AND HIGH-LIMIT THERMOSTAT

(GAS DRYERS ONLY)

1. Unplug dryer or disconnect power.

2. Turn off gas supply to dryer.

3. Remove the two hex-head screws from

the bottom flange of the toe panel. Pull the

panel out at the bottom, pull down, and

remove the panel.

Toe Panel

Toe Panel Screws

4. To remove the burner assembly:

a) Remove the two hex-head screws from

the burner support bracket, and pull the

bracket away from the burner assembly.

Burner Assembly

Burner Support

Screws

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before

operating.

Failure to do so can result in death or

electrical shock.

WARNING

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 74 75

Comments to this Manuals

No comments