Whirlpool WED75HEFW Installation Manual download pdf (Page 20)

With the edge with 2 notches at the top, align the notches

on the outer window assembly with the tabs on the trim ring

and lower into place as shown in ﬁgure A. Rotate the outer

window assembly counterclockwise to lock tabs into place

(ﬁgure B). Using a Phillips screwdriver, secure with 2 screws

removed earlier.

IMPORTANT: Do not overtighten.

6. Rotate and reassemble outer window

assembly to trim ring

Fig. A

Fig. B

Bottom

of door

Notches

8. Reinstall hinge and latch

on opposite sides

Using a T25

screwdriver, reinstall the latch plate, latch

backing plate, and hinge assembly on the opposite sides

from which they were removed.

7. Remove hinge and latch

Using a T25

screwdriver, remove the 3 screws securing the

latch plate and latch backing plate and the 5 screws holding

the hinge assembly in place.

Hinge

Latch

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Whirlpool WED75HEFW Installation Manual Page 20