Whirlpool WED75HEFW Installation Manual download pdf (Page 9)

3-wire receptacle (NEMA

type 10-30R)

3-prong plug

Spade terminals with

upturned ends

Ring terminals

3. Connect remaining wires

2. Connect neutral wire

4. Connect remaining wires

1. Remove center screw

3. Connect ground wire

Connect remaining wires under outer terminal block screws.

Tighten screws. Finally, reinsert tab of terminal block cover

into slot of dryer rear panel. Secure cover with hold-down

screw. Now go to “Venting Requirements.”

Connect remaining wires under outer terminal block screws.

Tighten screws. Finally, reinsert tab of terminal block cover

into slot of dryer rear panel. Secure cover with hold-down

screw. Now go to “Venting Requirements.”

Connect neutral wire (white or center) (C) of power supply cord

under center terminal block screw (B). Tighten screw.

Remove center terminal block screw (B).

Connect ground wire (F) (green or bare) of power supply cord

under green external ground conductor screw (A). Tighten

screw.

3-Wire Power Supply Cord Connection

Use where local codes permit connecting cabinet-ground

conductor to neutral wire.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

No comments

Whirlpool WED75HEFW Installation Manual Page 9