Whirlpool 3VED27DQ Specifications download pdf (Page 13)

The water dispenser

Chilled water comes from a tank behind the

meat drawer. It holds approximately 1.5 L

(1% quarts).

When the refrigerator is first hooked up,

press the water dispenser bar with a glass or

jar until you have drawn and discarded 1.9 to

2.8 L (2 to 3 quarts). The water you draw and

discard will rinse the tank and pipes. Allow

several hours to chill a new tankful.

NOTE: The small tray beneath the dispenser

is designed to evaporate small spills. There is

no drain in this tray. Do not pour water into it.

To dispense water:

1.

Press a sturdy glass against the water

dispenser bar.

2. Remove the glass to stop dispensing.

NOTE: Dispense enough water every week to

maintain a fresh supply.

The dispenser light

To turn on night light, slide dispenser LIGHT

switch to the left. See page 16 for directions

for changing the dispenser light bulb.

WATER LIGHT

m

Using the automatic ice maker

Here are a few things you will want to know

about your automatic ice maker:

l The ON/OFF lever is a wire signal arm.

Down . . . to make ice automatically.

up . . .

to shut off the ice maker.

NOTE: Do not turn ice maker on until it is

connected to the water SUDDIV. Instruc-

tions for ice maker water sur>plv hook

up are attached to the back of the

refriaerator cabinet.

l It is normal for ice crescents to be attached

by a corner. They will break apart easily.

l The ice maker will not operate until the

freezer is cold enough to make ice. This

can take overnight.

l If ice is not being made fast enough and

more ice is needed, turn the Refrigerator

Control toward a higher number. Wait a

day and, if necessary, turn the Freezer

Control toward C.

Raise signal

arm to stop

ice maker.

Lower signal

arm to start

ice maker.

l Good water quality is important for good

ice quality. It is not recommended that the

ice maker be connected to a softened

water supply. Water softener chemicals,

such as salt from a malfunctioning soft-

ener, can damage the ice maker mold and

lead to poor ice quality. If a softened water

supply cannot be avoided, it is important

that the water softener be well maintained

and operating properly.

13

1 ... 12 13 14 ... 24

Comments to this Manuals

No comments