Whirlpool 3VED27DQ Specifications download pdf (Page 6)

Installing it properly

1. Allow 1.25 cm (% inch) space on each

side and at the top of the refrigerator for

ease of installation.

2. If the refrigerator is to be against a wall,

you might want to leave extra space on

the hinge side closest to the wall so the

door can be opened wider.

For 3VED29DQ only:

A minimum of

2.9 cm (1 ‘/s inch) between the refrigerator

door and wall is required, or a minimum

of 3.8 cm (1% inch) between the freezer

door and wall is required.

3. The refrigerator can be flush against the

wall.

4. Make sure ice maker water supply has

been connected. Refer to Installation

Instructions.

Leveling it

Your refrigerator has 2 front leveling

screws-one on the right and one on the left.

To adjust one or both of these, follow the

directions below.

1.

Remove base grille. (See page 16.)

2. To raise front, turn screw clockwise.

3. To lower front, turn screw counterclock-

Right to raise;

left to lower

Use a screwdriver

wise.

4. Check with level.

5. Replace base grille. (See page 16.)

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments