Whirlpool EB9FVBXWQ01 Use and Care Guide download pdf (Page 12)

3. Clean the exterior surfaces.

Painted metal: Wash painted metal exteriors with a clean,

soft cloth or sponge and a mild detergent in warm water.

Rinse surfaces with clean, warm water and dry immediately to

avoid water spots.

Stainless steel: Wash stainless steel surfaces with a clean,

soft cloth or sponge and a mild detergent in warm water.

Rinse surfaces with clean, warm water and dry immediately to

avoid water spots.

NOTE: When cleaning stainless steel, always wipe in the

direction of the grain to avoid cross-grain scratching.

4. There is no need for routine condenser cleaning in normal

home operating environments. If the environment is

particularly greasy or dusty, or there is significant pet traffic in

the home, the condenser should be cleaned every 2 to

3 months to ensure maximum efficiency.

If you need to clean the condenser:

■ Remove the base grille.

■ Use a vacuum cleaner with a soft brush to clean the grille,

the open areas behind the grille and the front surface area

of the condenser.

■ Replace the base grille when finished.

5. Plug in refrigerator or reconnect power.

Defrosting

The No Frost system defrosts the freezer and refrigerator

compartments automatically. There is no need to defrost

manually.

IMPORTANT: It is normal for drops of water to collect on the back

wall of both compartments. Clean the drain opening regularly so

that the defrosted water can flow away and evaporate.

Cleaning the Drain

The drain opening is located on the bottom of the refrigerator

compartment, near the fruit and vegetable crisper drawer.

1. Unplug refrigerator or disconnect power.

2. Remove the cooler drawer (on some models) to access the

drain opening.

3. Locate the cleaning tool (provided) inside the drain opening.

4. Move the cleaning tool up and down inside the opening to

clear it of debris.

Lights

The lights in the refrigerator are LED which do not need to be

replaced. If the LED does not illuminate when the door is opened,

call Service to replace the light. See either the front cover or the

Warranty for contact information.

Vacation and Moving

Vacation

Short Vacation

There is no need to disconnect the refrigerator from the power

supply if you will be away for less than 3 weeks. Use up or freeze

perishable food.

If your model has an automatic ice maker:

■ Turn off the ice maker.

■ Shut off the water supply to the ice maker.

■ Empty the ice bin.

Long Vacation

If you are going to be gone for 3 weeks or longer, remove all food

and unplug the refrigerator.

To keep odor and mold from setting in, attach wooden or plastic

wedges to the upper edge of both doors with adhesive tape.

Open the doors enough so that air will circulate inside both

compartments.

If your model has an automatic ice maker:

■ Turn off the ice maker.

■ Shut off the water supply to the ice maker.

■ Empty the ice bin.

Moving

1. Remove all door bins, drawers and shelves.

2. Wrap the parts and secure with adhesive tape.

3. Raise the adjustable feet so they are no longer touching the

floor.

4. Close both doors and fasten with adhesive tape.

5. Tape the power cord to the refrigerator.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comments to this Manuals

No comments

Whirlpool EB9FVBXWQ01 Use and Care Guide Page 12

Comments to this Manuals

Related products and manuals for Fridges Whirlpool EB9FVBXWQ01