Whirlpool WRF954CIHZ Use and Care Manual download pdf (Page 19)

3. Pull the lter out of the housing.

4. Remove the water lter cap from the water lter being

replaced.

5. Install the water lter cap onto the new lter. Be sure to align

the arrows so the groves in lter align with ribs in lter cap.

6. Insert the lter into the housing.

7. Twist the water lter and turn 90° clockwise until it locks into

place and the arrows are aligned.

8. Push the water lter door closed.

The Water Filter Status Lights

The water ﬁlter status lights will help you know when to change

your water ﬁlter.

■ ORDER FILTER (yellow)—It is almost time to change the

water ﬁlter. “Order Filter” display is on all of the time but

off in Showroom mode and Sabbath mode.

■ REPLACE FILTER (red)—Replace the water ﬁlter. While you

are dispensing water, “Replace Filter” will blink 7 times and

an alert tone will sound 3 times.

NOTE: “REPLACE FILTER” will remain illuminated if the ﬁlter

is not reset on the user interface (UI).

■ RESET FILTER—Touch MAX COOL and MAX ICE for

3 seconds to reset water ﬁlter. The display will do a

3-second countdown, then ﬂash the icon and play a tone.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 123 124

No comments

Whirlpool WRF954CIHZ Use and Care Manual Page 19