Whirlpool KZT 6104 I F IT/HA Instruction for Use download pdf (Page 15)

GBGB

Practical advice on using the appliance

 Use cookware made from materials that are

compatible with the induction principle

(ferromagnetic material). We especially recommend

pans made from: cast iron, coated steel or special

stainless steel adapted for induction. Use a magnet

to test the compatibility of the cookware.

In addition, to obtain the best results from your hob:

 Use pans with a thick, flat base to fully utilise the

cooking zone.

 Always use pans with a diameter that is large

enough to cover the hotplate fully, in order to use

all the available heat.

 Make sure that the base of the cookware is

always dry and clean, to fully utilise and extend

the life of both the cooking zones and cookware.

 Avoid using the same cookware that has been

used on gas burners: the heat concentration on

gas burners may distort the base of the pan,

causing it not to adhere correctly.

Safety devices

Pan sensor

Each cooking zone is equipped with a pan sensor

device. The hotplate only emits heat when a pan

with suitable measurements for the cooking zone is

placed on it. If the indicator light is flashing, it may

indicate:

 An incompatible pan

 A pan whose diameter is too small

 The pan has been removed from the hotplate.

Residual heat indicators

While the temperature of the cooking zone remains

above 60°C, even after the programme has finished,

the residual heat indicators placed near the relevant

cooking zone remain lit to prevent the risk of burns.

Overheating protection

If the electronic elements overheat, the hob switches

off automatically and  appears on the display.

When the temperature has reached an appropriate

level, this message disappears and the hob may be

used again.

Safety switch

The appliance has a safety switch that automatically

switches off the cooking zones when they have been

in operation for a certain amount of time at a given

power level. When the safety switch has been

triggered, the display shows 0.

For example: the right rear hotplate is set to 5 and

will switch off after 3 hours of continuous operation,

while the front left hotplate is set to 2 and will switch

off after 10 hours.

SUITABLE

UNSUITABLE

Cast iron

Enamelled steel

Special stainless steel

Copper,

Aluminium, Glass, Earthenware,

Ceramic, non magnetic Stainless steel

Power level Operating time limit in hours

110

3-4-5 5

7-8 3

9-10 2

11 1

1 ... 14 15 16 ... 64

Comments to this Manuals

No comments

Whirlpool KZT 6104 I F IT/HA Instruction for Use Page 15

Comments to this Manuals

Related products and manuals for Hobs Whirlpool KZT 6104 I F IT/HA