Whirlpool EC5100 User Manual download pdf (Page 5)

Changing the bin door panel

You can easily change the color of the front

panel on the storage bin door. Six colors are

available: Black, Almond, Harvest Gold, White,

Toast and Platinum.

To change panel:

1. Open the storage bin door. Remove the

two screws on the top of the door, which

hold the handle.

2. Loosen the screws in both of the side trim

pieces.

3. Remove the handle and the handle

insert.

4. Carefully slide the panels out. You will find

three panels with six colors.

5. Choose the color you want to show and

carefully slide the panels back into the

door. NOTE: Be careful not to scratch the

panels as they are inserted.

6. Replace the handle insert and tighten

the screws in both side trim pieces. Replace

the handle and the screws.

Note: you can make a decorative wood

front to match existing cabinets. The

panel should be Y4” (6 mm) thick and 17” x

llY4” (433 mm x 286 mm). Remove the

color panels and break off the ribs on the

door insulation to allow for wood

thickness.

Changing the light bulb

The ice maker has a light bulb in the top of

the storage bin. To replace it, open the bin

door and follow these instructions:

1. Remove the two thumb screws and slide

the ice cutter grid forward, out of the two

slots near the water pan. Set the ice cutter

grid on the bin door.

2. Press the front of the light shield in while

pulling down to remove it from the light

bracket.

3. Remove bulb. Replace with a 15-watt

bayonet base type bulb.

4. Replace the light shield, ice cutter grid

and two thumb screws.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments